Im wanting to hav a level truck woth a 2" lift. Does anyone know how to go about doin this? Its stock 4x4 f150 plz give me some help

 

3.5" level in the front and add a leaf in the back. Thats what im going to be doing to mine.

 

But do they make the torsion bar keys to 3.5" or even 4"? Because all i hav seen is 2.5

 

They make a 3" but its not reccomended because it puts a horrible angle on your cv shafts and adds a ton of stress to everything.. i would crank the stock ones to level it and add a 2 or 3 inch body lift until you can afford a complete lift

 

The stock ones dont level it. It needs about 2 " and the stock ones crancked all the way up only lift the front about 3/4"

 

Hmm.. i would crank them and see what your cv's look like, because i know on my gen truck (97-03) when cranked up, the cv's get some funny angles, and if they seem ok, then go the 2" lift key.. i still wouldnt go higher than that though