Ferrite bead with hardware dashcam install?
Thread Starter
Junior Member
Joined: Jun 2025
Posts: 1
Likes: 0
Ferrite bead with hardware dashcam install?
Should ferrite beads be used when hardwire installing a dashcam?
If so, would it be on the power cable only, or also the rear camera cable? I've only had ferrites on various power cables on projects.
I have the usual radio/Sirius stuff.
I'm considering upgrading stereo and maybe adding a cell booster.
__________________
17 SCrew 4X4 Lariat Sport 501A 2.7 5.5 Shadow Black 6R80, 3.55, Toughbed, pano roof, 20" Sport+Wheelskins, Gorilla nuts, retractable tonneau, Fox 2.0 Coil Over, R.A.S., AMP PowerSteps, Morimoto XB Hybrids/LED turn/3rd brake, DD SS3 Fog Pro, MGP caliper covers, Banks iDash SuperGauge/pillar+PedalMonster, Ottocast U2Air Pro, Blackvue DR900X-2Ch Plus, *** Eliminator, BedRug Classic Bed Mat, WeatherTech mudflaps, Husky floor mats, 3.4 SYNC
If so, would it be on the power cable only, or also the rear camera cable? I've only had ferrites on various power cables on projects.
I have the usual radio/Sirius stuff.
I'm considering upgrading stereo and maybe adding a cell booster.
__________________
17 SCrew 4X4 Lariat Sport 501A 2.7 5.5 Shadow Black 6R80, 3.55, Toughbed, pano roof, 20" Sport+Wheelskins, Gorilla nuts, retractable tonneau, Fox 2.0 Coil Over, R.A.S., AMP PowerSteps, Morimoto XB Hybrids/LED turn/3rd brake, DD SS3 Fog Pro, MGP caliper covers, Banks iDash SuperGauge/pillar+PedalMonster, Ottocast U2Air Pro, Blackvue DR900X-2Ch Plus, *** Eliminator, BedRug Classic Bed Mat, WeatherTech mudflaps, Husky floor mats, 3.4 SYNC