please fill this form out so that others will be able to see this, and get a better idea what is out there, and not have to keep asking what is the best exhaust, lol

and sound clips, pictures, or videos would be great.

just coppy and paste this form, and fill it out.


-What year/motor?

-What system?

-How does it sound?

-How does it fit?

-How much did it cost?

-Where does it exit?

-What diameter pipe?

-Stock cats?

-How does it look?

-Are you happy with it?

-Comments

-Would you change anything?


thanks allot, and I hope this answers allot of questions.

 

-What year/motor?
1998 4.6
-What system?
home made straight pipe
-How does it sound?
low rumble at idle, and aggressive during acceleration, but "airy" and crackles a bit
-How does it fit?
very well
-How much did it cost?
12$ for pipe, I had a friend do the welding.
-Where does it exit?
before the passenger rear tire at a 30 degree angle
-What diameter pipe?
2.5 inch
-Stock cats?
yes
-How does it look?
good, but i need a tip to finish it off
-Are you happy with it?
for the price, yes
-Comments
i like it but i plan on changing it.
-Would you change anything?
yes, i plan to run 2.75 inch pipe from the headers with high flow cats, and a true dual system out the back with a h-pipe and no mufflers.

 

Will yall please fill this out

 

Great thread pro-x-144 This thread is perfect for the Installations & Reviews section

I haven't done any exhaust upgrade with my new truck so I'll post the setup from my 2002 F150 Lariat/Fx4 I did back in 2003.

-What year/motor?

2002 4.6L

-What system?

Flowmaster SI/DO Side exit Part Number: 17226 Force II System 50 Series muffler http://www.performancecenter.com/product.page/Exhaust+%26+Headers/Exhaust+Systems/0/0/Flowmaster/FLW17226/FORD/2002/F-150/4.6L

-How does it sound?

At ideal it was not loud enough for me but did sound good under full throttle

-How does it fit?

It fit like a glove

-How much did it cost?

I bought mine off a friend that never installed it on his truck (new in the box) for $200.00

-Where does it exit?

Dual side outlet

-What diameter pipe?

? Not sure stock I think with the 3" Stainless Tips

-Stock cats?

Yes

-How does it look?

Very nice

-Are you happy with it?

Looks yes, sound no

-Comments:

I wish it was louder that's all

-Would you change anything?

The muffler, I would have deleted it or got a 10 series. But that's just me I like it loud


Here are some reviews from others

flowmaster exhaust - 08/19/2005
Reviewer: Joel S Own this product - Yes
From braham, MN
The flowmaster kit was a clean fitting system. The only complaint was the cheap mufflers clamps. They are too thin and not strong enough; as I found out after breaking two of them. Quick tip: If you plan to use clamps, go to a parts store and get stronger ones. I wanted to put a 40 series on my truck, but the 50 series (delta flow) has a nice deep mellow tone. And sounds good when you get on it too. I noticed more low end torque, and better acceleration. I am pleased with the system and would recommend it to other people

not what i was looking for - 07/10/2005
Reviewer: jake correa Own this product - Yes
From springfield IL.
guys I'll tell you now its not a bad set up but when cut my stock muffler off way before i bought this and put a pipe on it and it was loud and deep but when i bought this i was hopin for it to be almost as loud but with a deeper tone but it didn't i really didn't like it all.... if it was a 40 series delta flow it would sound so much better

amazing! - 11/21/2004
Reviewer: Mike Rovira Own this product - Yes
From california
incredible, simply incredible! hearing my truck sound the way it does now makes me wonder why hasn't everyone bought this yet. installation was very easy. the only hard part was getting the old one off. power has improved but i'm waiting to see what my gas mileage does since i'm having too much fun stomping on it!

 

-What year/motor?
1995 5.8L 351W
-What system?
Muffler-SS-Xcelerator by Goerlich single inlet dual outlit Pipes-Mandrel SS 3"
-How does it sound?
I like it !..not too loud at the idle but has a nice deep rich tone
-How does it fit?
very well
-How much did it cost?
$611-Installed
-Where does it exit?
dual rear straight exit.
-What diameter pipe?
3" inch-21/2 from muffler
-Stock cats?
1
-How does it look?
good, but i need to find tips
-Are you happy with it?
Very !. I now have great acceleration and lots of torque
-Comments
This exhaust has a life time warrenty. Sounds great and offers noticable horsepower. Its still breaking in and getting a bit louder and deeper. I haven't seen a loss in gas mileage just a lot more horsepower. The engine is running fantastic and seems to really like the added air flow created by this exhaust.
I took off a stock exhaust and quite honestly the performance of this truck went from 'night to day'..snappy!
-Would you change anything?
Just the exit of the pipes. I pull a horse trailer and have it straight out the back. It might echo off the front of the trailer but hopefully can fix that with the right tips.

 

-What year/motor?
2001 F150 5.4L V8
-What system?
Dual Straight Pipes
-How does it sound?
VERY good. Nice rumbling tone at start and really makes noise when applied gas
-How does it fit?
perfect
-How much did it cost?
$40
-Where does it exit?
Dual 3 1/2 in tips straight out the back
-What diameter pipe?
2 1/2 in from cats and 3 1/2 in tips
-Stock cats?
yeah
-How does it look?
awesome!!!
-Are you happy with it?
extremely
-Comments
best exhaust you can get if you like it loud fro by far the cheapest price. The only tricky thing is gettin it to pass inspection in states where you must have a muffler
-Would you change anything?
nope, had glasspacks originally but changed them

 

What year/motor?
1998 4.6

-What system?
flowmaster dual catback super 40s
Headmann hedders

-How does it sound?
http://youtube.com/watch?v=B2YNiDy7OTU
i love the sound, nice deep rumble and not too loud while it idles.
what do you think? (vid)

-How does it fit?
perfect...

-How much did it cost?
the hedders 250 the exhaust 250 for both mufflers and tubes

-Where does it exit?
straight out the rear

-What diameter pipe?
2 1/2 to 3 inch tips

-Stock cats?
yessir

-How does it look?
I think it flows with the truck.

-Are you happy with it?
sure am.

-Comments


-Would you change anything?
i would get some new cats or get rid of them completley... whats the better decision?

 

-What year/motor? 2005 4.6L


-What system? 18in Magnaflow dumped behind the axle, stock piping

-How does it sound? Deep and Mellow

-How does it fit? Fine

-How much did it cost? 120.00

-Where does it exit? Over the axle

-What diameter pipe? 2.5

-Stock cats? Yes

-How does it look? Hidden

-Are you happy with it? Yes

-Comments Not for those looking for LOUD

-Would you change anything? Sometimes I want more noise...

 

-What year/motor?
1994 5.0
-What system?
Custom with dual inlet dual outlet FLOWMASTER
-How does it sound?
Not too loud at idle,sounds great at cruise speed and accel.
-How does it fit?
-How much did it cost?
$550.00
-Where does it exit?
After axle ,right rear exit like factory with 45 degree tips
-What diameter pipe?
2 1/4
-Stock cats?
no cats
-How does it look?
great and factory appearing
-Are you happy with it?
yes
-Comments
More torque and horsepower.Actually picked up almost 3 m.p.g. with this combo.The dual inlet/dual outlet acts like an X pipe to generate more torque.
-Would you change anything?
My underwear

 

-What year/motor?
2006 with a 5.4
-What system?
Custom Flo Pro Si/So
-How does it sound?
Great! Low rumble in the lower RPM's and no drone while cruising
-How does it fit?
Perfect
-How much did it cost?
$480
-Where does it exit?
Behind the rear right wheel
-What diameter pipe?
3" mandrel bent
-Stock cats?
Yes
-How does it look?
Good! Especially with the black tubing.
-Are you happy with it?
VERY
-Comments
I would def. recommend this exhaust
-Would you change anything?
Maybe a 5" tip and not a 4"