Changed my plugs at 71k truck runs rough now?
#1
Changed my plugs at 71k truck runs rough now?
Hi everyone I have the 2.7 EcoBoost
Everything was fine before no misfire or nothing
I recently did the plugs oem motorcraft and now truck seems hesitant and I can feel small vibration
On seat....any thoughts?
The guy that did em didnt gap them nor did he
Disconnect the battery will that affect it?
I was so happy until this happened dont know if it's the plugs or maybe something else thx.
Everything was fine before no misfire or nothing
I recently did the plugs oem motorcraft and now truck seems hesitant and I can feel small vibration
On seat....any thoughts?
The guy that did em didnt gap them nor did he
Disconnect the battery will that affect it?
I was so happy until this happened dont know if it's the plugs or maybe something else thx.
#2
Member
The installer probably cracked the ceramic insulator on one or more of them. Take it back.
.
.
The following users liked this post:
Meathead (10-07-2019)
#4
Sum Ting Wong
#5
Senior Member
Ho Li Fuc
The following users liked this post:
idrive (10-07-2019)
#7
It's weird no codes no nothing. I tow with it no issues. Its only at idle...am going to redo my plugs
Do u all reccomend disconnecting battery? And what plugs u recommend I am sticking to oem motorcraft.
Do u all reccomend disconnecting battery? And what plugs u recommend I am sticking to oem motorcraft.
Trending Topics
#9
Old Fart
Out of the 16 plugs I bought for mine 6 were not gapped right and if he did not change the boots you might have one not making good contact
(springs stay compressed or pills disintegrate) and you still have the not all the way on.
(springs stay compressed or pills disintegrate) and you still have the not all the way on.
The following users liked this post:
tareed94 (10-07-2019)
#10
Senior Member
Insulator crack or improper boot connect will throw a code ... guaranteed. No codes, go through the process and check everything.
If you have a quality scanner, do a live-time review of each cylinder.
If you have a quality scanner, do a live-time review of each cylinder.