day number 8.

ok now need clutch for shur makeing sqealing noise when i disengage to shift. sounds like the flywheel is rubbing??so with these problems i started looking around found some things local. but have questions.
my truck is a 86 4x4 w/4.9l carb.
what clutch 10" or 11"
found a transmission and transfercase altogether from a 94 f150 4x4 4.9l fuel injected the trans is a 5sp. my ? is will this bolt up and work and what clutch do i get?? any help thanks..

 

upon looking at things about this 94 tranny it has a internal slave wheres mine is external do i need to swap out any thing else? plan on new mounts for motor and trany can any one recomend a vendor that sells urathane? thanks

 

You can use the 10 or 11. Use the 11, it will last longer. The 5 speed will work, same clutch too. You'll need the hydraulic line to hook to the master. You might need the crossmember and you need the plate for the floor. The '94 transfer case doesn't have a spot for the speedometer.