Running Board Mode Setting
Has anyone experienced the following?
Thanks.
- Running board mode is set to OUT.
- Periodically, when I shut the engine off and exit, the boards retract and mode is back to AUTO.
Thanks.
Correct, the boards retract when you reach a certain speed, but I thought that was independent of selecting Auto mode? I'd like them to remain in the chosen mode and not revert to Auto mode every time. Perhaps it can be managed in Forscan.
The running board settings have the following modes:
Off
The power running boards remain stowed, regardless of door position.
Out
The power running boards remain deployed, regardless of door position.
Auto
The power running boards deploy when you approach your vehicle with a remote control, unlock the door or open the door.
The running board settings have the following modes:
Off
The power running boards remain stowed, regardless of door position.
Out
The power running boards remain deployed, regardless of door position.
Auto
The power running boards deploy when you approach your vehicle with a remote control, unlock the door or open the door.
Trending Topics
Any luck with this? Our 2024 Platinum is doing the same exact thing. It's really annoying...I want it set to "out" always until the truck reaches 3mph at which point they auto retract.
This won't help the OP but it gives me a chance to vent. When I ordered my 23 F-150, Auto running boards were the only option on the Platinum. I had them on my 2015 and I wasn't thrilled with them. In northern Ohio maintenance can be a problem for them. I ended up moving down to a Lariat to get the running boards I wanted. I'm happy with my decision but it should have been an option on the Platinum.
Thanks
Thanks











