The KustomFX switch panels are still in R&D and should be available in the near future!

I’ll keep you posted.

Thanks
-Brett

 

Check out my build thread! if you have the man's style shifter in the 21' what I'm making should be an option!

 

Brett/KustomFX, I loved the work you did for my 2011 and I'll gladly wait for you to figure out something for my new 2021. Do you have any early ideas you can share so I have some idea what I might be able to do???

 

Well, great timing!!
I just got them back from the machine shop, and will get ready to get anodized the end of next week... so approx a week, they will be done!

It will be a headliner mount, so a template is included and cutting into the headliner is required just like all the 2009-2014 (& non power rear slider 13th gen trucks).

Here are a few pics:










You will be able to choose 3 different style switches:
The OTRATTW/Carling Technologies, the classic KIC (Keep It Clean) style rockers & the round “Plasma” switches.
All three style panels will be a 4 switch panel.

Due to size and space restrictions, the OTRATTW/Carling switch panel simply has NO space for a laser etched logo. But the other 2 style switches, you can indeed get a FREE laser etched logo of your choice. (Again, the logo is Free, a gift, and a free service! .... there is NO charge for any logo that you choose).

You will simply position the template, (included), onto the headliner, mark it & remove it... then with a new sharp razor, you will simply cut the access hole for the switches. (It’s easier than you think!)

Right behind the headliner is the upper plastic retainer that the upper sunglasses console snaps into.... using a dremel, you will also need to cut that access hole for the switches to set back into.

Next week, I will be needing a couple volunteers that will get a FREE switch panel for final install and pics to help complete the final instructions.

I will be posting info on here and some of the FB groups as well when they are ready next week.

if any interest, please email me:
lethalweapon09@yahoo.com

Thanks,
Brett

 

interested! sent you an e-mail.

 

Received & replied....
Thanks & let me know.
- Brett

 

Update:
I now have the volunteers for the Free switch panels for their new truck.

Upcoming info & pics will be shown in the near future.

Thanks,

Brett

 

Has anyone had any ideas yet about where they’d actually mount some off-road lights with this new front end bodywork? With the new fog light design it’s not like you can just pop them out and put some Rigid pods in there, and the new grill (at least on the lariat sport I’m getting) doesn’t look like it has many open spaces that are big enough to fit pods or a small bar into.

 

I’m planning on putting a small bar where front license plate goes (I have 5.0 so no worries there), and was hoping to do another bar in lariat grille but we’ll see once companies can see what fits. You could always do ditch lights at the bottom of the A-pillar. I’m sure they will also end up with some sort of kit for the fog light location (hopefully).

I think I’m going to wait to install the Raptor overhead console for the switches once their available. More light options should be available at that point as well.

 

Specialty performance is also working on switches. I contacted them the other day here's what they are working on