Originally Posted by DuneRunr

Here are the changes required for Glare Free headlights. There are multiple modules that need to be changed so it’s not the easiest mod. Certainly not in the plain English section either.

Credit to @ROBB1 who gives a shoutout to: tonesto7 and Livnitup for paving the way.

Glare Free Menu (replaces Auto High beam) in APIM:

APIM
7D0-09-01 x1xx xxxx
7D0-09-03 xxCx xxxx

Note: a module reset in FORScan or power cycle is required for the menu to appear.

IPMA
706-01-01 xxxx xxx9

SCCM
724-04-01 xxx4 xxxx

IPC
720-01-01 xx8x xxxx
720-10-01 xxxx xxx3

HCM
734-01-01 xxxx xx01
734-01-02 x3xx xxxx

Perform one of the below in HCM depending on the specs of your truck:

Short bed No onboard scales / ccd
734-01-04 xx53 4E

Short bed with scales / ccd or Raptor
734-01-04 xx56 D1

Long bed no scales / ccd
734-01-04 xxD9 88

Long bed with scales / ccd
734-01-04 xxDC 17

Originally Posted by DuneRunr

Yeah no prob.

Some of those modules, especially the SCCM, are very sensitive and will often times give a service interrupted error when trying to write to them. If you get that, don’t panic. It’s not always the same for everyone but I was never able to write to that module at all until I got a custom Forscan version from Forscan support. That is worse case scenario but if you run into problems, just understand it’s normal.

Originally Posted by Scott902

I wish I was brave enough to play with this lol

Originally Posted by konoplya

my traction control button is combo'd with the hazard lights button. guess i'm SOL on this mod, huh?

Originally Posted by LT1_Hawk

Not my pic, but just bought the hill descent control/traction control combo button to replace the solid traction control button. Apparently hill descent control can be added via FORScan - via another popular forum.

Originally Posted by DuneRunr

In this thread list out the specific FORScan modifications you have decided to do on your truck.

The FORScan how-to thread is here for those that don’t know. Let’s try to keep this thread specific about what you have picked for your truck.

Here is my list. I list the modules in my notes which is why they are here, but they don’t need to be listed.

- Double honk disable, BCM
- Fog light cornering disable, BCM
- DRLs at full brightness, BCM
- Enable digital numbers under engine and tranny temp gauges, IPC
- Front seatbelt chimes disable, IPC
- Door ajar chime disable, IPC
- Turn signal lane change tap count to 4, SCCM
- Disable windshield anti fogging strategy so recirc stays on, HVAC
- Enable front cams with tire tracks in mud/snow mode, IPMA
- Glare Free headlights, APIM, IPMA, SCCM, IPC, HCM

Next on my list is the reverse auto braking disable once I can figure it out.

Originally Posted by sidwin

that's a great list.

- Double honk disable, BCM
- Enable digital numbers under engine and tranny temp gauges, IPC
- Front seatbelt chimes disable, IPC
- Turn signal lane change tap count to 4, SCCM
- Enable front cams with tire tracks in mud/snow mode, IPMA
- Glare Free headlights, APIM, IPMA, SCCM, IPC, HCM
-Window rolldown and up
-disable fake engine noise
-unreal sync
-climate bar at bottom
-heated steering wheel
-cooled seats
-75th birthday