When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I own a ‘22 Tremor 400a with horrible factory halogens.
I just preordered the DD elite series headlights and fogs. Hoping to make the tails match abit better now. Besides changing bulbs to LED is there anything I can do with colouring or tint ? Hoping to avoid replacing complete housing if possible.
Personally, I would install LED bulbs. I actually don't mind those housings. The turn signals may have the quick flash but there are remedies for that.
All the bulbs replaced with lasfit leds, then tint applied to the tail light. I would recommend a wrap shop for the service or the diy use of vht. Or an auto body shop that uses tinted clear coat.
At night......visibility should be determined from a distance.....because that's where it matters. Park the truck next to a car with halos...walk a good 100 ft away then compare. Double the distance in poor visibility weather ie rain/fog. This is to safeguard someone rear ending you.
[QUOTE=diambo4life;7363385]At night......visibility should be determined from a distance.....because that's where it matters. Park the truck next to a car with halos...walk a good 100 ft away then compare. Double the distance in poor visibility weather ie rain/fog. This is to safeguard someone rear ending you.[/QUOTE/]
True, I can get some later.
Halogen tail light upgrade or replace ?
