FORScan - 14th Gen F150s
#71
Senior Member
I think this is the switch to add hill decent control on a platinum without the FX4 package. Just need to figure out which address to change.
SwitchPart#: SW8524 (13D730)Usages: Hill Descent Control Switch, Traction Control Switch, 10/12/2020, F150, With Hill Descent Control, Advanced Automated Park System, Multi Function Read
SwitchPart#: SW8524 (13D730)Usages: Hill Descent Control Switch, Traction Control Switch, 10/12/2020, F150, With Hill Descent Control, Advanced Automated Park System, Multi Function Read
#72
How about the Trans Temp? Looks like the 2021 gauge doesn't show a number.
Anyone know if the oil pressure is legit or just a dummy gauge again?
#73
#74
Senior Member
#76
Senior Member
My Platinum has the power tail gate and I hated the beeping it made when going up or down. I went in and changed 720-02-02 xx*x to an D and it seems to have disable the chime.
Last edited by platinum99; 02-27-2021 at 05:20 PM.
#78
Glad to see some activity on this front. Waffling between an XLT 302A and King Ranch but if I can make the following changes to the XLT with minor hardware and/or Forescan changes, I’ll do that and save some money! Made quite a few changes to my ‘16.
- Wireless charger
- Power tow mirrors
- Stock LED projectors and LED tails
- 4A (I’m hopeful in this one but not holding my breath). This is the only thing that may force me into a higher trim.
- Wireless charger
- Power tow mirrors
- Stock LED projectors and LED tails
- 4A (I’m hopeful in this one but not holding my breath). This is the only thing that may force me into a higher trim.
Power tow mirrors - can't those just be ordered? Not a biggie to add.
If you must have LED's there are some really amazing bulbs now that are brighter than OEM LED's, nothing like the bulbs from 5 years ago, good light and beam, maybe $150 to swap all the front lights.
4A - more than likely, a swap won't be an issue, I've swapped both my 2020's to Raptor cases, it's probably more a matter of finding the correct as built codes.
#79
Senior Member
#80
Looking to disable the external chime/beeping the Powerboost has while in reverse. I thought it might be 720-01-01 xxxx xx*x xx-- from the IPC sheet. The value there is currently 6, which seems to indicate disabled for BWC (Backup Warning Chime) which its not. So is that a different warning/chime?
Any ideas?
Any ideas?