Ford Nav
I can set a destination on pavement but it will ultimately take a gravel road. It's the shortest route but not by much. What options is it on the screen or settings
Last edited by cullenkyla; Mar 1, 2025 at 12:59 PM. Reason: misspelled word
When you set a destination before you hit go or start, look at the screen and will ask if you want to use dirt roads or 4wd something like that.
Trending Topics
While you can set it to not use 4X4 roads, I think the issue is sometimes NAV doesn't know it. We were on a Montana road trip last summer, up in the foothills outside Livingston, and needed to get from A to B. Specifically checked NO 4x4. There were two ways to get from A to B, one was slightly longer, took you up to a highway, then along the highway to another road that led to B. The shorter route had found a road that was more direct. It suggested it, we took it.
Started out okay. Then turned to gravel. Then turned to dirt. Had it been raining, we would have turned around, but it was dry, so we kept going. There was about 6-8 miles of unpaved dirt road, before we hit asphalt again.
I have no idea how maps & NAV work, how they get their data, but I'm guessing it had no idea this was a dirt road. Wife & I looked at each other, and said next time we'll listen to Waze.
Started out okay. Then turned to gravel. Then turned to dirt. Had it been raining, we would have turned around, but it was dry, so we kept going. There was about 6-8 miles of unpaved dirt road, before we hit asphalt again.
I have no idea how maps & NAV work, how they get their data, but I'm guessing it had no idea this was a dirt road. Wife & I looked at each other, and said next time we'll listen to Waze.








