When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yes they only work on low which is fine and I’m familiar with the corner feature but they are also full effect fog lamps. My question is whether anyone has noticed them cycle off fully and back on at times while on auto but still on low beam. Can’t figure what is causing it.
Another truck here with fogs aimed to the ground 3 feet out, from the factory. I couldn't tell they were on, even in actual fog. I was able to easily slip my hand behind the wheel liner at the bottom, no need to remove anything or move the tires. I could see the white adjustment nut by laying under the truck with a flashlight. Just a 10 mm with an extension in my hand, no wrench, turning counter-clockwise until it topped out, then backed it off a bit. Another forum said that it was also possible to adjust using a screwdriver, from directly under the adjustment nut, but I didn't see that. Maybe a change for '23? Pic shows relative heights of the headlights at the top, left fog adjusted to the top, right fog still at the factory height. Doesn't look like much of a change, but it is.
