Topic Sponsor
2021+ Ford F150 Discussion of the 14th generation F150.
Sponsored by:
Sponsored by: Real Truck

claim control temperature issue

Thread Tools
 
Search this Thread
 
Old Mar 19, 2024 | 01:51 PM
  #1  
guo yimin's Avatar
Thread Starter
Member
5 Year Member
Liked
 
Joined: Dec 2017
Posts: 67
Likes: 5
From: canada
Default claim control temperature issue

for 2023 f150 xlt 2.7 ecoboost
hi last few days ago i had long drive on highway, which i found out is for temperature claim control, only turn the *** to low i can get cold air, other wise keep blow in hot air, anyone have same issue?
also the amount air come out each vent is much different,

Thank you

Reply
Old Mar 21, 2024 | 11:05 AM
  #2  
Knight's Garage's Avatar
Member
Liked
 
Joined: Feb 2024
Posts: 79
Likes: 16
From: Chelsea, AL
Default

Make sure you have the temp on both sides synced up calling for the same temp in Auto mode. Also there are three Auto stages you can choose from. I notice when it is hot out i have to set it to auto 2 ( first two lights on) on the Auto button. Each auto level gets more aggressive to reach and maintain set temp. it will take the truck a couple minutes to settle down and get to near your set temp when you first start it. I always use remote start and have no issues.
If you are on of those guys that doesn't want to use Auto climate then the only way you will get 100% cold air is by setting to LO temp then you just adjust your fan speed.
Reply
Old Mar 21, 2024 | 06:28 PM
  #3  
guo yimin's Avatar
Thread Starter
Member
5 Year Member
Liked
 
Joined: Dec 2017
Posts: 67
Likes: 5
From: canada
Default

Originally Posted by Knight's Garage
Make sure you have the temp on both sides synced up calling for the same temp in Auto mode. Also there are three Auto stages you can choose from. I notice when it is hot out i have to set it to auto 2 ( first two lights on) on the Auto button. Each auto level gets more aggressive to reach and maintain set temp. it will take the truck a couple minutes to settle down and get to near your set temp when you first start it. I always use remote start and have no issues.
If you are on of those guys that doesn't want to use Auto climate then the only way you will get 100% cold air is by setting to LO temp then you just adjust your fan speed.
thanks . i dont use auto button, also i have both side synced,
Reply
Old Mar 21, 2024 | 07:11 PM
  #4  
Knight's Garage's Avatar
Member
Liked
 
Joined: Feb 2024
Posts: 79
Likes: 16
From: Chelsea, AL
Default

Originally Posted by guo yimin
thanks . i dont use auto button, also i have both side synced,
if you don’t use auto, then you have to look at the temperature read out display for the set temperature like it’s just the old-school red to blue dial and imagine where you’re putting it at if you want it all the way cold needs to be on lo if you want it all the way needs to be on HI.

I always use auto because it’s much simpler. I don’t have to adjust it but one or 2° here or there every now and then most of the time it’s set around 68 to 72.
Reply




All times are GMT -4. The time now is 10:31 PM.