Originally Posted by LoneStar F150

My ebrake comes on when I park on a hill. I also had my boat hitched at that time so not sure if auto ebrake is driven by hill or boat.

Originally Posted by daemonic3

I noticed my ebrake on when I was trying to hitch or unhitch, which caused me problems because sometimes I will push or rock the truck a little bit to get the ball seated or unseated just right. I didn't manually apply it at all but when I went to the cab sure enough it was applied. I took it as the truck trying to be "helpful" but was not in the mood to try to debug or figure out how to disable.

Originally Posted by John Adams

There is definitely a setting for the Ebrake to engage whenever the vehicle I put into PARK and disengage when taken out of PARK.

Originally Posted by Dasmoetorhead

I can't find it in the menu's.

Originally Posted by John Adams

I know my salesman showed it to me because he turned it on. I then went into drive and it released, put it back in park and it engaged. I had him turn it off because I didn't think it was necessary. Now I just went out to my truck, went through every vehicle setting and driver assistance setting and can't find it.

Originally Posted by dial912

When I was in the 360 camera view, there is a menu button and a small button with a hand on it, I pushed the hand button and it said auto e-brake active. I turned it back off. This is separate from the Auto Hold in the driver assistance menu.

Originally Posted by dial912

When I was in the 360 camera view, there is a menu button and a small button with a hand on it, I pushed the hand button and it said auto e-brake active. I turned it back off. This is separate from the Auto Hold in the driver assistance menu.