I have a 2011 FX4 3.5 L Ecoboost. One of the female pin terminal ends in the connector is bad. I do not want to buy an entire wiring harness to fix one connector. I have checked every salvage yard in Florida I can't find anyone who has a 2011 wiring harness connector I can pull a wire from. I tried a 2010 and the connector was different so it wouldn't seat on my plug. Does anyone know where I can get one, or have a terminal end number for reference, or know if a different connector uses the same connectors? Maybe the ABS module? My truck has been down two weeks I would appreciate any help! This is all I need:

 

2011-2014 are the same.
.

 

Thanks, that's a start!

 

@Erik McGowan Didn't see the pic before when I replied but that looks exactly like the small terminal connector used in the Molex connectors at the body/door connection.

The pcm has 2 different sizes so if you need the big one you might dig around the link below to see if you can find a match. I have some of the small connector ends and checked it on my truck's pcm, it fits perfect. $0.22 each here's where you can get it.

https://www.onlinecomponents.com/te-connectivity-amp-brand/17199581-10261482.html?utm_source=octopart&utm_medium=inven toryrefferal&utm_campaign=octopart&ref=OctopartFee d

I bought a few of them as well as the male counter part so I could add power fold mirrors to my truck.


.

 

That's awesome I may be saved! Thank you! I'll keep you updated if it matches up in case this problem comes up for anyone else.

 

Oh and welcome to the forum.
.

 

I ordered the ones you suggested but I also found an exact match through info from a local tuner. Here is the link to the actual ford part that fits the connectors in a 2011 Ford F150 3.5 L Ecoboost:

https://www.tascaparts.com/oem-parts...ge-du2z14474ca

 

$4.42 each on Tasca Damn they mark them things up considering the others are $0.22 each, granted you don't get that section of wire or heat shrink, that's crazy.
.