Maintenance Interval
06-29-2011, 12:50 AM
#11
Junior Member
Join Date: Jun 2011
Location: Montana
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Both my vehicles are long-in-the-tooth, '94 and '97, so I'm not sure the injectors would be of the most modern design, consequently the use of injector cleaner. The cleaner does double duty as intake valve and combustion chamber cleaner as well as providing some extra lube for the fuel pump.Thanks Katt. You have some valid points there I never really considered before. And I am guessing it works, so its all good.
07-01-2011, 01:35 AM
#12
Junior Member
Join Date: Jul 2011
Location: Midland, TX
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Don't forget about the suspension arms!!! Had to get mine replaced because ball bearings were all chewed up as shown below. 150k miles is what was on my truck when it happened. When aftermarket ones are installed you can then just pump in lube through a valve for maintenance. https://www.facebook.com/photo.php?f...type=1&theater