LED Tail lights - now truck thinks bulb is burned out
#1
LED Tail lights - now truck thinks bulb is burned out
I tried searching the forums for this but did not find any other questions.
This past weekend I put LED tail lights in my 2013 Lariat. All of the blubs (leds) are working great.
However, when I put on my blinker, the blinker is going really fast, like when the truck signals you that a blub is burned out.
Is this common when you put in LED's or do I maybe have another issue?
This past weekend I put LED tail lights in my 2013 Lariat. All of the blubs (leds) are working great.
However, when I put on my blinker, the blinker is going really fast, like when the truck signals you that a blub is burned out.
Is this common when you put in LED's or do I maybe have another issue?
#2
Member
Some have had luck using Forscan to change that. I used resistors made for the purpose.
.
.
#4
Member
One for each light bulb replaced by an led. Be sure to secure them to sheet metal so the cooling fins can dissipate heat properly.
.
#6
Member
Welcome.
.
.