ABS Module Replacement
Thread Starter
Junior Member
Joined: Nov 2017
Posts: 1
Likes: 0
ABS Module Replacement
Hi All,
My local dealer tells me I need to replace the ABS Control Module on my 2008 F150 FX4 (5.4L). At over $1100 I prefer to do it myself but I have a couple questions:
1) does the replacement ABS Module need to be "programmed" after installation ?
2) will simply replacing the module turn off the ABS and Brake Warning lights (or is that a separate scan tool function after installation) ?
I haven't been able to find an answer to these questions. Apparently, beginning with the 2008 models the ABS Module went from a KH unit to a Teves unit. Already looked into having the existing one rebuilt but it turns out the Teves units are not rebuildable. So, it looks like I'm going to have to replace the module with a Ford part (the part alone was $769).
Thanks,
Lou R
My local dealer tells me I need to replace the ABS Control Module on my 2008 F150 FX4 (5.4L). At over $1100 I prefer to do it myself but I have a couple questions:
1) does the replacement ABS Module need to be "programmed" after installation ?
2) will simply replacing the module turn off the ABS and Brake Warning lights (or is that a separate scan tool function after installation) ?
I haven't been able to find an answer to these questions. Apparently, beginning with the 2008 models the ABS Module went from a KH unit to a Teves unit. Already looked into having the existing one rebuilt but it turns out the Teves units are not rebuildable. So, it looks like I'm going to have to replace the module with a Ford part (the part alone was $769).
Thanks,
Lou R
5 Year Member
Joined: Nov 2012
Posts: 724
Likes: 184
From: California
The module, should be programmed when installed, and once installed, you will need a scan tool to bleed the brake system of all air, because there will be air in the control unit that can only be removed by activating the unit while bleeding brakes.
Hi All,
My local dealer tells me I need to replace the ABS Control Module on my 2008 F150 FX4 (5.4L). At over $1100 I prefer to do it myself but I have a couple questions:
1) does the replacement ABS Module need to be "programmed" after installation ?
2) will simply replacing the module turn off the ABS and Brake Warning lights (or is that a separate scan tool function after installation) ?
I haven't been able to find an answer to these questions. Apparently, beginning with the 2008 models the ABS Module went from a KH unit to a Teves unit. Already looked into having the existing one rebuilt but it turns out the Teves units are not rebuildable. So, it looks like I'm going to have to replace the module with a Ford part (the part alone was $769).
Thanks,
Lou R
My local dealer tells me I need to replace the ABS Control Module on my 2008 F150 FX4 (5.4L). At over $1100 I prefer to do it myself but I have a couple questions:
1) does the replacement ABS Module need to be "programmed" after installation ?
2) will simply replacing the module turn off the ABS and Brake Warning lights (or is that a separate scan tool function after installation) ?
I haven't been able to find an answer to these questions. Apparently, beginning with the 2008 models the ABS Module went from a KH unit to a Teves unit. Already looked into having the existing one rebuilt but it turns out the Teves units are not rebuildable. So, it looks like I'm going to have to replace the module with a Ford part (the part alone was $769).
Thanks,
Lou R
Junior Member
Joined: Jun 2019
Posts: 6
Likes: 1
abs module
Hi All,
My local dealer tells me I need to replace the ABS Control Module on my 2008 F150 FX4 (5.4L). At over $1100 I prefer to do it myself but I have a couple questions:
1) does the replacement ABS Module need to be "programmed" after installation ?
2) will simply replacing the module turn off the ABS and Brake Warning lights (or is that a separate scan tool function after installation) ?
I haven't been able to find an answer to these questions. Apparently, beginning with the 2008 models the ABS Module went from a KH unit to a Teves unit. Already looked into having the existing one rebuilt but it turns out the Teves units are not rebuildable. So, it looks like I'm going to have to replace the module with a Ford part (the part alone was $769).
Thanks,
Lou R
My local dealer tells me I need to replace the ABS Control Module on my 2008 F150 FX4 (5.4L). At over $1100 I prefer to do it myself but I have a couple questions:
1) does the replacement ABS Module need to be "programmed" after installation ?
2) will simply replacing the module turn off the ABS and Brake Warning lights (or is that a separate scan tool function after installation) ?
I haven't been able to find an answer to these questions. Apparently, beginning with the 2008 models the ABS Module went from a KH unit to a Teves unit. Already looked into having the existing one rebuilt but it turns out the Teves units are not rebuildable. So, it looks like I'm going to have to replace the module with a Ford part (the part alone was $769).
Thanks,
Lou R
Junior Member
Joined: Jan 2025
Posts: 6
Likes: 1
From: Houston Texas
i have a 2008 F150. I am changing the abs module with one I got from a auto salvage y
Junior Member
Joined: Jun 2019
Posts: 6
Likes: 1
UPDATE: so I got the ABS module back, original one. Installed, Nothing happened. Lights are still on. Truck rides perfect, brakes work like they should. The lights should go out on their own.
But now I am unable to comm with the abs part of the brake system. Not able to comm with the SRS part also. I tried 3 different scanners with same result. But I am able to scan for engine codes. ok. I've checked for broken wires at scanner port and the wiring I can think of. I am at a stand still but am still driving my truck.
Just hate the lights on just staring at me when driving.
If I have any updates. I will post . thanks
But now I am unable to comm with the abs part of the brake system. Not able to comm with the SRS part also. I tried 3 different scanners with same result. But I am able to scan for engine codes. ok. I've checked for broken wires at scanner port and the wiring I can think of. I am at a stand still but am still driving my truck.
Just hate the lights on just staring at me when driving.
If I have any updates. I will post . thanks