Topic Sponsor
Custom Fabrication Department This is the section to discuss any and all custom work that you've done or had made that may not be available on the retail market.
Sponsored by:
Sponsored by:

Making the SuperCab dog friendly (pic)

Thread Tools
 
Search this Thread
 
Old 08-19-2017, 06:47 PM
  #1  
Junior Member
Thread Starter
iTrader: (1)
 
mcarroll42's Avatar
 
Join Date: Dec 2016
Posts: 23
Received 7 Likes on 3 Posts
Default Making the SuperCab dog friendly (pic)


Long story short didn't feel the need for a crew cab because it was just the Mrs and I. However we acquired a 70lb furry friend and he was pretty cramped in the back with the seats up or down. So I removed them and bolted plywood with carpet down to the seat brackets. The driver seat is where I normally sit. I'm 6'2" and he has plenty of room. Problem solved.

%5BURL=http://s66.photobucket.com/user/mcarroll42/media/EDAD0081-D166-4D30-A357-3C3351E76211_zpsuhwke8xt.jpg.html%5D%5BIMG%5Dhttp://i66.photobucket.com/albums/h265/mcarroll42/EDAD0081-D166-4D30-A357-3C3351E76211_zpsuhwke8xt.jpg%5B/IMG%5D%5B/URL%5D

Last edited by mcarroll42; 08-19-2017 at 06:51 PM.
The following users liked this post:
PeterTheFirst (12-14-2022)
Old 08-19-2017, 09:43 PM
  #2  
Senior Member
 
JCH841's Avatar
 
Join Date: Jul 2017
Location: Suffolk VA
Posts: 177
Received 21 Likes on 19 Posts
Default

I made a removable platform for my in-laws Tacoma. They have two dogs and may need the rear jump seats occasionally.




All times are GMT -4. The time now is 03:28 PM.