When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Custom Fabrication DepartmentThis is the section to discuss any and all custom work that you've done or had made that may not be available on the retail market.
I just got a 2018 F150 4x4 XLT with a 3.5. I haul a lot of firewood and brush in the back of my truck so I wanted a plastic bedliner to slide out easily. I also needed the tiedowns for my dirtbikes but I didn’t like the idea of sanding gravel getting underneath the bedliner. My solution was to plug the holes and use the box link system over the bedliner. I made some locating pins and used a heat gun to find where to drill the holes.
Sorry, I am not removing the bed liner. When I said slide it out I was talking about the firewood or brush in the bed liner. If it was on a non-slip surface it would be more difficult to grab a handful on the bottom and pull the whole load out.
Boxlink installed over drop in liner
