I'm going to be installing a Digital Guard Dawg system on my 2017 XLT. DGD charges $200 for an OEM push button to be wired directly to their system. The OEM button costs $18 shipped. I can do my own wiring between the included button's harness and the OEM button's male harness, but what I don't know is the part number for the male plug to receive the OEM push start. I would prefer to use a factory plug if at all possible to maintain the best quality install I can.

Are their any parts diagram guru's out there that could help me find this information? Thanks in advance

 

I found this, any help figuring out which one I need will be greatly appreciated.

https://parts.ford.com/content/dam/f...il%20Final.pdf

 

Currently thinking this is the most likely candidate. Any opinions? I hope there is an affordable option because this thing is $88.

 

Yes that's the one a Motorcraft WPT-1164. Shop around.

 

You could try this one from ebay:

https://www.ebay.com/i/323809843329?...hoCfroQAvD_BwE

 

Thanks guys, once I figured out the actual part number I was able to order one from Tasca for much cheaper. Hopefully, the parts are correct. Will update.