Has any you thought of adding the expedition wireless charger to there f150? It looks possible.

 

Part number? I've never had luck with wireless charging. I have a thin case and still doesn't work.

 

Now I'm wondering if the Expedition's **** shifter is a direct replacement for the floor shifter in the F150...

 

this is what i found

 

If the charger was very visible then i could see paying that but for that cubby hole down there where no one really sees its a lot of dough. just get one of these charging pads and place it in there. If you really want to get fancy you could drill a to feed the cable through the corner and hardwire the cable so its clean like this. You could also get some really short usb cords which would be the easiest and look clean still. https://www.ebay.ca/itm/Qi-Wireless-...0enji3N55iyKcQ
This would be perfect because its non slip

 

I'd be interested in this as well. Especially if it would allow me to fit another cup holder in the console.

 

I believe the floor shifter in the F150 actually still has a cable to the transmission. The dial shifter obviously does not use a shift cable, so I don't believe a retrofit will be cheap or easy.

 

I'm not sure if this is the same, but I purchased a Ford wireless charging kit for my 17 fusion and it was total junk. It uses it's own standard that didn't work on any phones with wireless charging built in. You have to order a wireless charging phone case from the charging kit manufacturer(it comes with a voucher for a free case). I found that they didn't offer any cases for most of the newer phones.

 

I think that is just the accessory you can buy through Ford, this one is actually a standard(?) or factory option. I'm interested to see if this is just plug and play.

 

Yep, I see that now that I looked at the 18 Expedition brochure. Wonder why they still sell the crap accessory kit, but acknowledge that isn't what people really want but doing it properly in a new vehicle...