Window louvers
#1
Junior Member
Thread Starter
Window louvers
Does any have an in window channel window louvers installed ?
I think in my Super cab i have to use the stick on ones, does any one have any suggestions, i only want to do the fronts.
I think in my Super cab i have to use the stick on ones, does any one have any suggestions, i only want to do the fronts.
The following users liked this post:
HansF150 (08-17-2015)
#4
F250>F150
iTrader: (2)
I bought the AVS and they were not good. Couldn't close the window and when it finally did close it cracked the visor. The rears were hit or miss.
From what I hear, EGR isn't much better. I ended up taking photos of mine and a video of how it sounded/looked when it closed and sent it to autoanything.com where I purchased them. They sent it on to AVS who approved a field termination. Refunded my money and I didn't have to send them back. That channel is really tight with them in there.
A few guys have modified them to make it a little bit thinner in certain areas. I had the AVS on my Tacoma and I had zero issues with them. Maybe they will redesign them.
From what I hear, EGR isn't much better. I ended up taking photos of mine and a video of how it sounded/looked when it closed and sent it to autoanything.com where I purchased them. They sent it on to AVS who approved a field termination. Refunded my money and I didn't have to send them back. That channel is really tight with them in there.
A few guys have modified them to make it a little bit thinner in certain areas. I had the AVS on my Tacoma and I had zero issues with them. Maybe they will redesign them.
#7
I have the AVS. They were tight at first, and I had to help the Windows close at first without bouncing back. I left them closed a couple of days and now they close without assistance.
I found the factory edges very sharp, Dangerously sharp. I actually cut myself while unpacking them. I smoothed all the edges with a sanding block before installation. I fear serious bodily harm would occur, especially when washing the windows, if I had not done this.
I found the factory edges very sharp, Dangerously sharp. I actually cut myself while unpacking them. I smoothed all the edges with a sanding block before installation. I fear serious bodily harm would occur, especially when washing the windows, if I had not done this.
Trending Topics
#8
Senior Member
I have the EGR's and the work great although once in awhile passenger front won't do auto up but most of the time np.
The following users liked this post:
HansF150 (08-17-2015)
#10
Junior Member
Thread Starter
Vent shades
Thanks, all
I had the weather tech on my last truck in the channel, but for some reason when I checked their web site they did not have a listing for my crew cab, I'll check again.
I had the weather tech on my last truck in the channel, but for some reason when I checked their web site they did not have a listing for my crew cab, I'll check again.