Weird Problem and Wench Light
Thread Starter
Senior Member
Joined: Jul 2015
Posts: 244
Likes: 44
Weird Problem and Wrench Light
i was driving the truck on the highway at about 80mpg. The wrench light came on so I used my Bluetooth OBDII reader and noticed the readiness codes were showing not ready. 5/8 were not ready. About 5 minutes later I lost power, coasted to a stop, and the truck wouldn’t turn off or start.
Returned home one and it lost power and coasted one more time. We left for a week. Came back and no wrench light. I used the scanner to read the readiness codes and performed the appropriate drive cycle. Everything went READY.
This then happens two more times. I got a better reader and read that I had code U0422 Invalid Data Received From Body Control Module.
Now the truck is fine. No wrench. No readiness faults.
I cant make it do it nor can I predict when it will happen. Any thoughts or things to test?
Returned home one and it lost power and coasted one more time. We left for a week. Came back and no wrench light. I used the scanner to read the readiness codes and performed the appropriate drive cycle. Everything went READY.
This then happens two more times. I got a better reader and read that I had code U0422 Invalid Data Received From Body Control Module.
Now the truck is fine. No wrench. No readiness faults.
I cant make it do it nor can I predict when it will happen. Any thoughts or things to test?
Last edited by Jabooh1; Mar 22, 2018 at 10:35 PM.
Thread Starter
Senior Member
Joined: Jul 2015
Posts: 244
Likes: 44
i haven’t gone to the dealer. Way past warranty. I tried to change the title. Hasn’t worked.
Senior Member
Joined: Nov 2015
Posts: 471
Likes: 67
Gotcha on the warranty...but with this sort of issue it might be worth a shot to at least get a diagnosis. There's nothing worse than being stranded when you can least afford it.
Thread Starter
Senior Member
Joined: Jul 2015
Posts: 244
Likes: 44
