Stance - How do I get my bed to sit a little lower
#21
My '16 F150 Screw 4x4 I fortunately discovered the ability to remove the blocks. While it was a little more involved than installing shackles(I shortened the U bolts) I think it's a better solution. The back of the truck now sits 1.25" taller in the rear, and levels out with the boat, trailer, or load in the bed instead of tail dragging.
Did you remove the blocks, and yes I see the pics, truck looks awesome.
Is that a typo, sits "taller"??
Thanks
#22
Sorry, key words left out, only 1.25" taller(higher) than the front, down from the stock height, think it was nearly 3" before.
#23
Senior Member
I would suggest removing the axle blocks first and see if you like it.
Then, if you are still not happy, go with a 2 inch front level.
My truck sits almost dead level. As far as adding weight in the bed.....ahem that's too "ghetto" and will surely impact your mpg.
Then, if you are still not happy, go with a 2 inch front level.
My truck sits almost dead level. As far as adding weight in the bed.....ahem that's too "ghetto" and will surely impact your mpg.
Last edited by Hctr154; 07-26-2016 at 10:52 PM.