speaker wires
speaker wires
Does anyone know where I can tap the door speaker wires without running into the door? I want to add an amp to my 2018 XLT. I can use forscan to enable line level outputs, but I thought I saw a thread that had detail on tapping the door speaker wires along the sill, without running wire into the doors. Thx.
This is much cheaper and works great for adding an amp to factory speakers.
https://www.ebay.com/itm/ISO-SOT-984...72.m2749.l2649
Here is a thread with more info on amps and wiring.
https://www.f150forum.com/f118/so-yo...et-amp-313994/
https://www.ebay.com/itm/ISO-SOT-984...72.m2749.l2649
Here is a thread with more info on amps and wiring.
https://www.f150forum.com/f118/so-yo...et-amp-313994/
Last edited by s140s; Aug 16, 2018 at 09:31 PM.
Senior Member
Joined: Apr 2018
Posts: 485
Likes: 97
From: EVERYWHERE
Easier method
Just tap into the radio wires its the best and easiest method just remove the center cover speaker 4 screws
remove the radio bazel 2 conectors and 4 around the radio
wires to tap in
LF Speaker (+) WHITE
LF Speaker (-) WHITE/BROWN
RF Speaker (+) WHITE/VIOLET
RF Speaker (-) WHITE/ORANGE
LR Speaker (+) WHITE/GREEN
LR Speaker (-) BROWN/YELLOW
RR Speaker (+) BROWN/WHITE
RR Speaker (-) BROWN/BLUE
Connectors
https://m.ebay.com/itm/60-Quick-Spli...kAAOSwn1FbMi5X
line out
https://m.ebay.com/itm/New-PAC-SNI-3...wAAOSwiqFaWTPW
remove the radio bazel 2 conectors and 4 around the radio
wires to tap in
LF Speaker (+) WHITE
LF Speaker (-) WHITE/BROWN
RF Speaker (+) WHITE/VIOLET
RF Speaker (-) WHITE/ORANGE
LR Speaker (+) WHITE/GREEN
LR Speaker (-) BROWN/YELLOW
RR Speaker (+) BROWN/WHITE
RR Speaker (-) BROWN/BLUE
Connectors
https://m.ebay.com/itm/60-Quick-Spli...kAAOSwn1FbMi5X
line out
https://m.ebay.com/itm/New-PAC-SNI-3...wAAOSwiqFaWTPW