Seat swap
#102
was as that image from power or memory seats? Do we think the platinum seat has two seat modules?
im also noticing the module you just posted only connects to MS can, what is out of frame on that screen? ( that's connected via MS can, just guessing the parts of the seats that are controlled via the sync screen ? )
Last edited by cwcb08; 04-03-2017 at 12:34 AM.
#104
Not sure but I believe only the platinum driver has this module as it gets wiring from 313 which the other seats do not have. I found it by searching the connectors that it has c341abcd which C341-B is the connector that had all the motor direct points I used for movement
#107
so there are definitely two modules
looks like the seat module gets power from the red harness which is powered by the blue harness
and the blue harness poweres 311&313
so both will need power as the height is on the blue harness and the recline/lumbar are on the red, i need to look more and see where horizontal gets power (c362)
looks like the seat module gets power from the red harness which is powered by the blue harness
and the blue harness poweres 311&313
so both will need power as the height is on the blue harness and the recline/lumbar are on the red, i need to look more and see where horizontal gets power (c362)
Last edited by cwcb08; 04-03-2017 at 11:15 AM.
#108
how about
12v: 313-5 311-21 (seat)
gnd: 313 52&31 (seat)
And normal power/gnd from 311 truck side 21&16
that should power your DSM
and in theory power the motors since they are all connected by c341b which is also part of the dsm
12v: 313-5 311-21 (seat)
gnd: 313 52&31 (seat)
And normal power/gnd from 311 truck side 21&16
that should power your DSM
and in theory power the motors since they are all connected by c341b which is also part of the dsm
Last edited by cwcb08; 04-04-2017 at 10:16 AM.