When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
thank you TMCOLEGR. This is obviously very helpful.Are the relays on prior years non serviceable? Anyone know where to look for the relays? I see that they are in the BJB but is there anything that shows where they would be located?
thank you TMCOLEGR. This is obviously very helpful.Are the relays on prior years non serviceable? Anyone know where to look for the relays? I see that they are in the BJB but is there anything that shows where they would be located?
My owners manual shows 4 & 8, they are side by side, I believe it would be the end next to the firewall. Just look like a square box
Last edited by Gordy49913; 07-31-2018 at 04:14 PM.
Mine shows different. The R02 relay shows to be PCM relay and R05 shows to be Elec Fan relay
I see that now, things have changed with the 2018. They must have a relay block somewhere, since they all seem to be missing from the new BJB. Not going to be much help then, sorry.
So i traced the yellow orange at pin 4 from the door switch (C535) to pin A20 at (C510) then to what i believe is (C1590). ill attach photo to see if this is the correct connector. Anyway, if it is the correct connector the yellow orange wire dead ends here. This wire is for the Telescope out. So i may not have the wiring.There is a yellow orange on the male side but no wire at female side. So i suspect thats it. If so, Anyone know which connector is the C1035C? TIA
So i traced the yellow orange at pin 4 from the door switch (C535) to pin A20 at (C510) then to what i believe is (C1590). ill attach photo to see if this is the correct connector. Anyway, if it is the correct connector the yellow orange wire dead ends here. This wire is for the Telescope out. So i may not have the wiring.There is a yellow orange on the male side but no wire at female side. So i suspect thats it. If so, Anyone know which connector is the C1035C? TIA
it’s that brown one that needs the 4 wires added to it but it looks like you don’t have them on the engine harness side.
it’s that brown one that needs the 4 wires added to it but it looks like you don’t have them on the engine harness side.
Thank you. So the brown one is C1590. So im good to there then as you can see they are not populated on the engine harness side. Just need to see where the connector they are supposed to go to is located (C1035C and C1035D) . Then hope that i have the dang relays!
Thank you. So the brown one is C1590. So im good to there then as you can see they are not populated on the engine harness side. Just need to see where the connector they are supposed to go to is located (C1035C and C1035D
) . Then hope that i have the dang relays!
So that's very interesting...
2015 - 2017 F150s had the wires populated for power telescope in the engine harness and the relays were present in the BJB on all XLT trim levels and higher even if the trucks didn't ship with tow mirrors.
2015 - 2017 F150s had the wires populated for power telescope in the engine harness and the relays were present in the BJB on all XLT trim levels and higher even if the trucks didn't ship with tow mirrors.
Yeah, Sucks but shouldnt bee to bad to add. Just need to figure out where i need to connect the 4 wires to and if i even have the relays or where they would be. Would be interesting if the 2018 platinum has a different BJB with the relays but i doubt it.
Thanks for all your help if there’s no way you could do the I stocker me In Michigan is there some way you could tell me what six wires so I could try and relay the information to possibly someone I could find locally to do this job for me add the six wires from where to where
thanks for all your help
Originally Posted by redbroncokid
FL3Z-14631-A
FL3Z-14630-E
one is drivers door the other is passenger door. Replace with these and keep current module. Use forscan to turn on folding. 6 wires need to be added to interior harness to make telescope work. Those can be pulled from your old harness and reused.
07-31-2018, 03:55 PM
