Raptor wheels on stock f150
The following users liked this post:
DJWRIGHT (01-11-2023)
#33
Here's mine, Icon Stage 1 kit, 2-2.25" of lift on raptor take offs - 315/70/17. No rubbing at all.
The following 10 users liked this post by 5pointyote:
20derek18 (06-09-2020),
Austin Ron (03-11-2021),
Coloradoboss (04-28-2021),
DL Behnke (12-24-2020),
DrewJones87 (01-14-2021),
and 5 others liked this post.
#34
Senior Member
Just picked her up today from getting Bilstein 6112/5160 and ohhhh momma.. I think i need to ditch the air dam Stat....
The following 9 users liked this post by COKingRanch:
BadBoy4fun_wa (07-14-2020),
buzzin 1/2 dozen (06-10-2020),
Coloradoboss (04-28-2021),
DL Behnke (12-24-2020),
johnday in BFE (06-10-2020),
and 4 others liked this post.
#35
Senior Member
The following users liked this post:
COKingRanch (06-10-2020)
#36
Senior Member
Can mine join the party? they look familiar
The following 7 users liked this post by JpEufracio:
COKingRanch (06-10-2020),
DL Behnke (12-24-2020),
JD01 (08-31-2021),
lottadot (11-10-2020),
maddog1949 (01-04-2022),
and 2 others liked this post.
#37
The following users liked this post:
COKingRanch (06-10-2020)
#39
I have 5100s set to the 2.1" setting on my 2015 and did experience rubbing on the crash bars. I have since cut them off and only experience rubbing now when I have the wheel at full lock and am in reverse on an incline (no problem on flat ground). As dagooaz mentioned above, it seems some people have issues running the 1.75" setting and some don't. It's weird how there is so much variation - maybe has something to do with the front end suspension in 2wd vs 4wd trucks?
#40
Raptor wheels w/ 315/70/17 on 2.5" level
I have a 2016 f150 XLT 4x2, does anyone know if the takeoffs will fit with 315/70/17s and a 2.5" level even though I do not have 4x4? I have only seen this run on 4x4 trucks and they say there is no rubbing, but I have not seen anyone put this on a 2 wheel drive truck. Thanks!