Raptor wheels on stock f150
#1
Raptor wheels on stock f150
Will raptor wheels/tires fit on a bone stock f150 without a lift/level and without modifying crash bars, etc? I see from searching the forums that they fit with a level, but wondering if they will without one?
i like the looks of the tires, want to replace the stock 20” hankooks and hoping for a better ride on 17” wheels. I’m looking at a set of take-offs.
i like the looks of the tires, want to replace the stock 20” hankooks and hoping for a better ride on 17” wheels. I’m looking at a set of take-offs.
Popular Reply
03-21-2019, 11:43 AM
#2
Super Duper Senior Member
Rims, yes, tires, no. Tires are 35x12.50's. You'll need at least a level for them to fit, and you'll likely have to trim to make them fit.
What year is your truck?
What year is your truck?
#4
Doesn't matter!
Here are my stock Goodyear Wrangler Fortitude 265/70R 17 tires on the Raptor wheels, now granted I do have a Bilstein 2.1 level on the front and replacement shocks on the rear.
The following 3 users liked this post by sddesigns:
#5
2in level will allow you to run Raptor Take offs. If you want to replace the tires you can run 285/70/17 with no level
The following 2 users liked this post by txbbqF150:
dowens1233 (02-09-2023),
krwson (02-08-2023)
#6
Thanks for the replies! Was hoping to get away without it but will have to make a call which way to go. Anyone take the plunge into bilstein 5100 level + raptor setup? Would you do it again?
Trending Topics
The following 9 users liked this post by fpsrubyred:
apellafr (09-02-2021),
DJWRIGHT (01-11-2023),
DL Behnke (12-24-2020),
dmatt13 (01-15-2020),
DrewJones87 (01-14-2021),
and 4 others liked this post.
#9
Senior Member
Also running Raptor takeoffs on a 2” Bilstein 5100 level. Would 100% do it again. It looks and rides awesome.
#10
I had the beadlocks with a 2 inch level and rubbed like crazy. I had to trim. Ended up going with some Fuels and ran a barely large than stock tire. Gas mileage went to **** with the takeoffs, but look super bad ***.