Raptor shift Paddles on non-Raptor write-up
#433
Gone Golfin
iTrader: (3)
Before taking the wheel off use you fingernails to grab around the edges where the horn sits on the wheel and work your way around pulling outward, firmly. I know when I attached my wheel it wanted to pinch there and not sit out like it should.
#434
Holes are there. Just hard to see. They're down in between the center of paddles where they attach to the wheel.
Before taking the wheel off use you fingernails to grab around the edges where the horn sits on the wheel and work your way around pulling outward, firmly. I know when I attached my wheel it wanted to pinch there and not sit out like it should.
Before taking the wheel off use you fingernails to grab around the edges where the horn sits on the wheel and work your way around pulling outward, firmly. I know when I attached my wheel it wanted to pinch there and not sit out like it should.
I'll give that a try. I took the family to Chicago for a small weekend get away and traffic is nuts. No horn here is dangours !!
#435
This mod has captured another victim. Thanks to everyone who has contributed to that. I've ordered my wheel(White Bear Lake) and harness(BGG Enterprises) last night. Looking forward to having the wheel and paddles. Anyone find a way to add the Tow/Sport button to the wheel?
Last edited by battlefrog; 05-21-2017 at 10:52 PM.
The following users liked this post:
2016BoostedGreyGoose (05-23-2017)
#436
BGG made this so easy to install! Just make sure you push the pens all the way down hahaha or you might end up like me puzzled why it will not down shift. Easy fix just used a pen tool to push it in until it clicks. If your on the fences to tallest this your shelf it's easy and it works !
The following users liked this post:
2016BoostedGreyGoose (05-23-2017)
#437
Holes are there. Just hard to see. They're down in between the center of paddles where they attach to the wheel.
Before taking the wheel off use you fingernails to grab around the edges where the horn sits on the wheel and work your way around pulling outward, firmly. I know when I attached my wheel it wanted to pinch there and not sit out like it should.
Before taking the wheel off use you fingernails to grab around the edges where the horn sits on the wheel and work your way around pulling outward, firmly. I know when I attached my wheel it wanted to pinch there and not sit out like it should.
Thanks for the advice.
Last edited by Soon2bfast; 05-23-2017 at 11:49 PM.
#438
Senior Member
iTrader: (1)
This mod has captured another victim. Thanks to everyone who has contributed to that. I've ordered my wheel(White Bear Lake) and harness(BGG Enterprises) last night. Looking forward to having the wheel and paddles. Anyone find a way to add the Tow/Sport button to the wheel?
The following 2 users liked this post by 2016BoostedGreyGoose:
Firerunner (05-25-2017),
Husker (05-24-2017)
#439
Senior Member
The following users liked this post:
Scotsskier (05-23-2017)