Morrell Maximo Ultra. What is the best or most common way to make it fit/work.

 

I used some plastic pipe strap and the factory mounting location. Just formed the pipe strap to the tweeter and secured the tweeter to it. Then secured the strap to the a pillar with the factory screws. Put a little adhesive foam around the edge of the treater where it touches the a pillar to keep it from rattling.

 

What is pipe strap?

 

Your friend has shared a link to a Home Depot product they think you would be interested in seeing.

3/4 in. x 25 ft. Plastic Pipe Hanger Strap

https://www.homedepot.com/p/301505505

 

Just use some scrap plastic, cut it, and melt it a little. use a flippin yogurt container or something LOL

https://www.f150forum.com/f30/2019-x...2/#post6437631

 

Here’s another option:

https://www.crutchfield.com/p_120BKS...ack-Strap.html

 

Those speakers are well loved. Head on up to the Audio section of this forum. The user @HushCarAudio has helped quite a few folks with this type of thing.

 

I cut the housing off the stock tweeter and epoxied it to the new tweeter. Cut off the OEM connecters and soldered them to the new tweeters, everything fit perfectly.