Foot slipped off the brake pulling into the gas station and I kissed the pole. Broke the plastic on the front bumper. Looks like part number 17E810 but there is an A and B and I can't find the difference. 15 XLT 3.5EB with heater.
Can someone help me out before I have to call the dealer?

Thanks.

 

Are you referring to item 17 here:

https://www.tascaparts.com/auto-part...nts-front-scat



I use this site for a lot of parts.

 

Yes, that is the one. I have to have one that can have a license plate bracket as it is required by law. I have the bracke. I only broke the right side of the insert. but when they show A and B I wasn't sure which was which.

 

wow, what are the odds this is the exact same part im looking for as well. Anyone know where to find instructions to replace the part, i quickly looked under the truck and afraid i will have to pull the bumper to get to all the retention clips.

 

Take a plastic trim tool to one end or the other and pry towards you. Once you can get your fingers around it, just give it a good pull. It's held on by trim clips, real easy to pull it off.
Maybe just call Tasca and ask them which number if for what. There's one for the 5.0, and one for the Egoboost.

 

As mentioned, just pull it off. I would recommend getting new clips if you can. Mine got quite loose and couldn't be resent after I pulled mine off.

 

How many clips are on that thing?

 

Didn't really count, but seems like 8-10. You might screw up a couple when pulling it off.
Here's a PN# from Ford if you need to get some, I think I got about 20 of them for spares. I bought them in a four pack bag each.
W714030-S424
TascaFord
https://www.tascaparts.com/oem-parts...ip-w714030s424