Hello! This is my first post on here and I really need help to figure out an issue that I have with my truck. My airbag light is on and so I scanned it with an OBD scanner and got the following codes.
I have a 2015 ford f-150 lariat supercrew


I am looking for the open circuit that the third code shows and this is the plug that I found.

I don't know what is supposed to be plugged in as there is completely nothing around that could plug in here. This is located on the driver-side rear corner of the cab under the rear glass.
If anyone has any clue what this plug is or what the codes mean then please let me know. Thank you!

 

That's the subwoofer hookup. https://www.f150forum.com/f118/facto...9/#post4908457

 

The truck has been in an accident that deployed one or more airbags.

B1193:00-C0 Crash Event Storage Full and Locked

You need to follow the attached document. Pay particular attention to the following passage in this procedure.

When any deployable device or combination of devices have deployed and/or the RCM has DTC B1193:00 (event threshold exceeded) in memory, the repair of the vehicle SRS is to include the removal of all deployed devices and the installation of new deployable devices, the removal of all impact sensors and installation of new impact sensors and the removal and installation of a new RCM. Diagnostic Trouble Codes (DTCs) must be cleared from all required modules after repairs are carried out.

 

Front passenger fender took a smacc. Curtain airbag deployed, driver steering wheel bag deployed, passenger dash bag deployed, seatbelts extended 100%.
I'm wanting to repair what's repairable as per an actual service and/or repair manual would recommend. Thanks for reading.

 

​​​​​​​
How is everything going?