Anybody try the mcgaughys 2/4 drop or am I going to be the the first to bite the bullet? Anybody ever have any issues with mcgaughys?

http://www.mcgaughystore.com/2015-20...gaughys-70039/

 

http://www.crownsuspension.com/2015%20F150%203/5%20Drop I was looking into this one. I have a 4wd also. No experience with mcgaughy's.

 

Well I have a 2wd regular cab.
I guess ill be one of the first ones to try this kit out. Will post pics when done

 

I've been looking at them, seems like one of the best kits made to preserve some factory ride. Just haven't bit the bullet yet

 

My girlfriend put on on her 12 screw rides good handles a little different but not bad just different. I took to 60 miles down the turnpike at 95mph every thing was good. The only thing we found is that you need to get a camber kit to get it Alined. So I recommend if doing it ur self have the camber kit ready as well takes no time at all the chew the inside of the tires off waiting for the kit to come in.

 

I asked about this in the lowering forum but didn't get a response. I ordered and just received the kit. My truck goes in tomorrow to have it installed. Will report back when it is done and I get to drive it.

 

I went with the Crown, which I'll never do again. Hope you have better luck with the McGauphys. We used to run a lot of their stuff back in the day and I know they make quality lift kits.

 

Care to share what the problem was?

 

Here is mine with the McGaughy Drop...I like it. Not as low as others but no issues either.

 

I know this post is from 2016, was wondering how your truck is riding since then. Looking at getting this same kit on my 2018 Screw. Thanks!