I have designed a bracket that allows you to run pod lights and light bars in the lower grille opening on a 14th gen f150. From my research the bracket should also work on 15-20 f150s as well. If you are willing to take some pics and measurements please send me a private message!

Thanks,
Connor

 

I like the 5 light setup for filling the space more equally... Not sure if your state " requires" the plate on front.. NH does require and I mounted down low on raptor skid plate of my XLT. So 4 pods would work for me.
I already have DD SS3 fogs in factory location and Rigid driving lights in center
Good option you present here

 

Yes sadly I have to run a front plate!

Running Swarfworks bracket!

 

What measurements do you need?

 

Looking for pictures of the two inter-most bumper bolts, and length from bolt to bolt.

This is the inner bumper bolt on the passenger side.

Thanks,
Connor

 

Bump

 

Where exactly is this bolt? I don’t see anywhere that looks like your pic.

 

The bumper bracket bolts face outward on our gen trucks, but it is right at 26" center to center.

 

So y’all have access from the front? Can I get some pics?

14th gen is 25.25” from center to center.

 

This is the best I have from when I was replacing my bumpers, looks pretty similar.