The Leveling Kit Thread
#981
#983
True? I would like to get an inch or a bit more rake back. Going to look at 2.25 or 2.5" blocks...seems like that would get a +1 or 1.25 back
#984
Yes, Just under an inch. Occassionally tow a couple of touring bikes in a 14x7 two axle enclosed trailer. My hope is it will tow that set up without a reverse rake.
#985
Junior Member
extremely quiet. Working on air pressure to get that hopping gone. At 45, hitting ridge or Lil bumps w throw the rear out to side. 38 in front, 35 in front has calmed it down
#987
Finally got around to doing my 2.5 leveling kit this past weekend. Had the alignment done today, so I went ahead and broke out the tape measure to see the final results. (Measuring from the ground to the center of the stock fender flares) Stock was Front- 37 1/8" & Rear- 40 5/8". After the leveling kit and alignment, Front- 39 7/8" & Rear- 40 1/4". So I ended up with 2 3/4" of lift in the front and went down 1/2" in the rear. This gave me the perfect level look I wanted. Very happy with the results.
22x12 Hostile wheels come next week. I should have them on next weekend!
22x12 Hostile wheels come next week. I should have them on next weekend!
#989