Leveled F150s
#2
#6
Senior Member
Was going to go with Bilstein's all around with stock springs until I added a heavy (124#) brushguard which decreased the ground to wheel well measurement 1/2". After checking with 3 manufactures about stock vs. aftermarket front spring rates decided to go with complete front strut assemblies. Went with Rancho loaded front and 9000 rear. Stock height was 37.75" front and 40.5" rear. After is 40" front and 40.375" rear, this is on an XL without the flares. Ride is a little stiffer but not much and the shocks are adjustable. Make sure to have your wheel alignment checked after installation and have headlight/foglights adjusted.
Last edited by chiefdave; 11-21-2017 at 10:43 AM.