Leveled F150s
 

Looking to see what ya'll have for leveling your trucks. Include pictures and what you used! Let's keep this rolling.

Here is mine

https://cimg8.ibsrv.net/gimg/www.f15...c42131207.jpeg

https://cimg9.ibsrv.net/gimg/www.f15...edae3f150.jpeg

https://cimg5.ibsrv.net/gimg/www.f15...8783850c6.jpeg

Billstein 5100’s all the way up in the front. 285/70/17 Ridge Grapples in MT Deegan 38’s. My driveway slopes a bit but the truck is dead on level.

Was going to go with Bilstein's all around with stock springs until I added a heavy (124#) brushguard which decreased the ground to wheel well measurement 1/2". After checking with 3 manufactures about stock vs. aftermarket front spring rates decided to go with complete front strut assemblies. Went with Rancho loaded front and 9000 rear. Stock height was 37.75" front and 40.5" rear. After is 40" front and 40.375" rear, this is on an XL without the flares. Ride is a little stiffer but not much and the shocks are adjustable. Make sure to have your wheel alignment checked after installation and have headlight/foglights adjusted.

Does anyone have any opinions on the 3" shock and control arm change over offered through Rough Country?