LED Headlight bulbs review -> BPS Lighting S5 Z-ES bulbs
#521
Senior Member
I cant say how much I love this combo. These low beam bulbs (orientated correctly) produces NO glare at all. The nights are now like daylight with the factory fog lights and these LED headlight bulbs. I am 100% happy. Did not need any re aiming either. Removing the whole headlights was a pita but its done
#522
Senior Member
#523
Senior Member
Done. I like this upgrade a lot.
Did fogs, lows and highs.
A couple of minor notes: I went through the fender liner with very little effort. No need to remove the headlight housings. I did buy 85mm extended dust covers, but they didn't fit very well. I tried the standard covers, and they went on fine. So the heat sinks don't have as much room, which isn't ideal.
1 pair:
2 pair:
Thanks again, and sorry for the bad phone pics:
Did fogs, lows and highs.
A couple of minor notes: I went through the fender liner with very little effort. No need to remove the headlight housings. I did buy 85mm extended dust covers, but they didn't fit very well. I tried the standard covers, and they went on fine. So the heat sinks don't have as much room, which isn't ideal.
1 pair:
2 pair:
Thanks again, and sorry for the bad phone pics:
Last edited by Whysoangry; 06-25-2018 at 12:31 AM.
The following users liked this post:
Murof (08-08-2018)
#524
Great informative in depth LED review BlackBoost!
I just have one question, is a canbus needed when installing the led bulbs? I think I'm going to try the Sinoparcel H11 to start with, then add the high beams if I like the Sinoparcel low beams. Thanks for any info you all can provide.
I just have one question, is a canbus needed when installing the led bulbs? I think I'm going to try the Sinoparcel H11 to start with, then add the high beams if I like the Sinoparcel low beams. Thanks for any info you all can provide.
The following users liked this post:
BlackBoost (06-27-2018)
#525
Senior Member
Join Date: Mar 2017
Location: South St. Louis county, Mo.
Posts: 1,465
Received 423 Likes
on
303 Posts
I have a 2016 with the sinoparcel LEDs high, lows and fog. I don't use the CANBUS adaptors and have had no issues. Hope there will be issues in the future. Btw my lows are still drl and fog lights are always on.
The following users liked this post:
m3zumm (06-26-2018)
The following users liked this post:
m3zumm (06-26-2018)
#527
I have a 2018 also, so this is good news to hear. Everyone is always talking about how bad the headlights are, so I was actually surprised that they aren't too bad. Of course I'm use to driving a 1999 F-150, now it has really bad headlights! Any improvement over stock will be a huge upgrade for me. LOL
#529
Blunt
Thread Starter
Great informative in depth LED review BlackBoost!
I just have one question, is a canbus needed when installing the led bulbs? I think I'm going to try the Sinoparcel H11 to start with, then add the high beams if I like the Sinoparcel low beams. Thanks for any info you all can provide.
I just have one question, is a canbus needed when installing the led bulbs? I think I'm going to try the Sinoparcel H11 to start with, then add the high beams if I like the Sinoparcel low beams. Thanks for any info you all can provide.
#530
Senior Member
Join Date: Mar 2017
Location: South St. Louis county, Mo.
Posts: 1,465
Received 423 Likes
on
303 Posts
Some report lights going out, others don't. I think the LED resistance is very much on the borderline of triggering the sensor from turning off the power. For me, the passenger light would turn off. Sometimes after a 2 seconds, sometimes after a minute. I put in the CANBUS modules and haven't had a problem. They're cheap and easy to install anyways.