Led & Bliss tail light wiring diagram?
#1
Led & Bliss tail light wiring diagram?
Hello everyone,
I've searched high and low for a wiring diagram to hard wire an under tailgate led light strip. I can't find anything.
Can someone please help me with this? I know I can probe with my test light but I'm always alone. The truck is a 2016 Lariat Special edition with LEDs with BLISS.
Thanks in advance!
I've searched high and low for a wiring diagram to hard wire an under tailgate led light strip. I can't find anything.
Can someone please help me with this? I know I can probe with my test light but I'm always alone. The truck is a 2016 Lariat Special edition with LEDs with BLISS.
Thanks in advance!
#2
The FORScan Guy
This help?
The following users liked this post:
Murdered XLT (04-10-2024)
#4
Thanks for the diagram! Traditionally parking lights and brake lights are combined. With the LED diagram above, the parking and brake lights on on different circuits.
The four pin conector from the led strip only has one wire for parking and brake lights. So I'm assuming that I won't be able to have the dimmer parking light option on the strip. Just left, right, brake and reverse......
Am I missing something?
The four pin conector from the led strip only has one wire for parking and brake lights. So I'm assuming that I won't be able to have the dimmer parking light option on the strip. Just left, right, brake and reverse......
Am I missing something?
#5
Thanks for the diagram! Traditionally parking lights and brake lights are combined. With the LED diagram above, the parking and brake lights on on different circuits.
The four pin conector from the led strip only has one wire for parking and brake lights. So I'm assuming that I won't be able to have the dimmer parking light option on the strip. Just left, right, brake and reverse......
Am I missing something?
The four pin conector from the led strip only has one wire for parking and brake lights. So I'm assuming that I won't be able to have the dimmer parking light option on the strip. Just left, right, brake and reverse......
Am I missing something?
PS: keep in mind the circuit labeled Turn Outage (pin # 10) is not turn signals. Turn outage is the circuit our F150s use to notify the BCM when the LED Stop/Turn lamp has failed.
Pin # 2 Stop/Turn Lamps
Pin # 3 Parking Lamps
Pin # 4 Reverse Lamps
Last edited by tmcolegr; 10-22-2016 at 06:35 AM.
#6
You'd best off wire in something like I used to make my KR LED tails work. It's a trailer wiring converter that uses an input signal from your factory lights, then connects directly to 12V power and has an output for park, stop and turn. You can then wire your strip to the output of that box.
I've been running it for over a year and it works perfect. You have to outsmart the truck.
I've been running it for over a year and it works perfect. You have to outsmart the truck.
Trending Topics
#10