I'm keep getting these ODB2 error codes
Size Matters
Joined: Aug 2015
Posts: 5,958
Likes: 3,402
These same codes are logged in every 2015-2018. I have performed this SSM many times without resolution. Ignore them.
SSM 47045 - 2015-2018 F-150 - Intermittent Inoperative Air Conditioning (A/C)/Radio/Power Window Switch Control - Multiple Illuminated Indicators And/Or DTCs
Some 2015-2018 F-150 vehicles may exhibit intermittent and/or inoperative A/C, radio, and/or power window switch control with multiple illuminated warning indicators and/or diagnostic trouble codes (DTCs) U0140, U0155, U0253, U0401, and/orU0452 stored in the front controls interface module (FCIM). This may be caused by excessive network traffic on the controller area network (CAN) Bus causing the FCIM to lock up. Before replacing the FCIM, complete a battery reset, clear all DTCs and run a FCIM self-test. If the issue is still present, follow normal diagnosis.
SSM 47045 - 2015-2018 F-150 - Intermittent Inoperative Air Conditioning (A/C)/Radio/Power Window Switch Control - Multiple Illuminated Indicators And/Or DTCs
Some 2015-2018 F-150 vehicles may exhibit intermittent and/or inoperative A/C, radio, and/or power window switch control with multiple illuminated warning indicators and/or diagnostic trouble codes (DTCs) U0140, U0155, U0253, U0401, and/orU0452 stored in the front controls interface module (FCIM). This may be caused by excessive network traffic on the controller area network (CAN) Bus causing the FCIM to lock up. Before replacing the FCIM, complete a battery reset, clear all DTCs and run a FCIM self-test. If the issue is still present, follow normal diagnosis.
Member
Joined: Mar 2020
Posts: 34
Likes: 6
Came across this. I have identical codes. I dont know when they showed up as I did all the mods first and then plugged ForScan in as the cable took forever to get here... but... reviving this in case anyone found solutions...
I am getting same codes after changing 4.2 screen to 8 inch screen and APIM, adding bigger bezel (FCIM) to the screen and adding TCU for Sync connect. All parts I got are off a 2017 302a F150 with heated seats and parking sensors. I have 2018 XLT 301 package (no parking sensors, no heated seats).
I am getting the following codes on ForScan:
*instantly upon clearing DTCs*:
On APIM:
U0159 Lost communicatino with parking assist control module A
*** Resolved this somehow by changing FCIM VIN to my VIN using ABS values, and by changing APIM 7D0-01-01 2A2A 0406 0037 to 7D0-01-01 2206 0406 00xx)
*instantly upon starting the vehicle*
On FCIM:
B1038 Left Front Seat Heater Sensor (additional fault system circuit short to battery or open)
B130A Right Front Seat Heater Sensor (additional fault system circuit short to battery or open)
After driving for a while:
On FCIM:
U0155 Lost communication with IPC
U0253 Lost communication with APIM
U0401 Invalid data recieved from ECM/PCM A
U0452 Invalid data received from restraints control module
I was able to clear up the parking assist code, but I am dead stuck on the rest
I am getting same codes after changing 4.2 screen to 8 inch screen and APIM, adding bigger bezel (FCIM) to the screen and adding TCU for Sync connect. All parts I got are off a 2017 302a F150 with heated seats and parking sensors. I have 2018 XLT 301 package (no parking sensors, no heated seats).
I am getting the following codes on ForScan:
*instantly upon clearing DTCs*:
On APIM:
U0159 Lost communicatino with parking assist control module A
*** Resolved this somehow by changing FCIM VIN to my VIN using ABS values, and by changing APIM 7D0-01-01 2A2A 0406 0037 to 7D0-01-01 2206 0406 00xx)
*instantly upon starting the vehicle*
On FCIM:
B1038 Left Front Seat Heater Sensor (additional fault system circuit short to battery or open)
B130A Right Front Seat Heater Sensor (additional fault system circuit short to battery or open)
After driving for a while:
On FCIM:
U0155 Lost communication with IPC
U0253 Lost communication with APIM
U0401 Invalid data recieved from ECM/PCM A
U0452 Invalid data received from restraints control module
I was able to clear up the parking assist code, but I am dead stuck on the rest
Senior Member
Joined: Mar 2016
Posts: 152
Likes: 22
Came across this. I have identical codes. I dont know when they showed up as I did all the mods first and then plugged ForScan in as the cable took forever to get here... but... reviving this in case anyone found solutions...
I am getting same codes after changing 4.2 screen to 8 inch screen and APIM, adding bigger bezel (FCIM) to the screen and adding TCU for Sync connect. All parts I got are off a 2017 302a F150 with heated seats and parking sensors. I have 2018 XLT 301 package (no parking sensors, no heated seats).
I am getting the following codes on ForScan:
*instantly upon clearing DTCs*:
On APIM:
U0159 Lost communicatino with parking assist control module A
*** Resolved this somehow by changing FCIM VIN to my VIN using ABS values, and by changing APIM 7D0-01-01 2A2A 0406 0037 to 7D0-01-01 2206 0406 00xx)
*instantly upon starting the vehicle*
On FCIM:
B1038 Left Front Seat Heater Sensor (additional fault system circuit short to battery or open)
B130A Right Front Seat Heater Sensor (additional fault system circuit short to battery or open)
After driving for a while:
On FCIM:
U0155 Lost communication with IPC
U0253 Lost communication with APIM
U0401 Invalid data recieved from ECM/PCM A
U0452 Invalid data received from restraints control module
I was able to clear up the parking assist code, but I am dead stuck on the rest
I am getting same codes after changing 4.2 screen to 8 inch screen and APIM, adding bigger bezel (FCIM) to the screen and adding TCU for Sync connect. All parts I got are off a 2017 302a F150 with heated seats and parking sensors. I have 2018 XLT 301 package (no parking sensors, no heated seats).
I am getting the following codes on ForScan:
*instantly upon clearing DTCs*:
On APIM:
U0159 Lost communicatino with parking assist control module A
*** Resolved this somehow by changing FCIM VIN to my VIN using ABS values, and by changing APIM 7D0-01-01 2A2A 0406 0037 to 7D0-01-01 2206 0406 00xx)
*instantly upon starting the vehicle*
On FCIM:
B1038 Left Front Seat Heater Sensor (additional fault system circuit short to battery or open)
B130A Right Front Seat Heater Sensor (additional fault system circuit short to battery or open)
After driving for a while:
On FCIM:
U0155 Lost communication with IPC
U0253 Lost communication with APIM
U0401 Invalid data recieved from ECM/PCM A
U0452 Invalid data received from restraints control module
I was able to clear up the parking assist code, but I am dead stuck on the rest
Was wondering if you got it resolved. my truck has the same error codes. At random I will drive and then my radio, AC/heat and gauges will 'restart'. The truck will continue to be operational, it just dings and everything resets like I had just gotten into the truck. I too added a TCU and upgraded my 2015 from the old my ford touch to sync 3.