Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Highway Noises

Thread Tools
 
Search this Thread
 
Old Jan 29, 2024 | 03:33 PM
  #1  
NorthwestFord'a Man's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2024
Posts: 8
Likes: 2
Default Highway Noises

Hey, everyone. I'm new to owning an F150, and thus new to the Forum. Thanks for having me.

I recently purchased a 2017 F150 Platinum. It's been a phenomenal machine thus far, but I've recently noticed a noise coming from the engine more and more frequently during highway travel. While sustaining a speed between 75 & 85mph - and with the gas pedal slightly pressed - a noise comes about that sounds similar to placing a baseball card in the spokes of a fast-moving bicycle tire.

If I do nothing, the noise persists but fades away after 10~15 seconds.
If I remove my foot from the gas, the noise is eliminated immediately.
If I press the gas slightly harder, the noise gets faster and louder but quickly goes away.

Does anyone have an idea as to what might be the cause of such a noise??

Thanks again.
Reply
Old Jan 29, 2024 | 03:47 PM
  #2  
Blue2016XL's Avatar
Senior Member
Community Builder
Liked
Loved
Community Favorite
 
Joined: Jul 2017
Posts: 2,394
Likes: 1,171
Default

Sounds like you have an IWE partially engaging if you have 4WD. If you do and you have 4A, put it in 4A and see if the noise stays away.
Reply
Old Jan 29, 2024 | 04:24 PM
  #3  
NorthwestFord'a Man's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2024
Posts: 8
Likes: 2
Default

Originally Posted by Blue2016XL
Sounds like you have an IWE partially engaging if you have 4WD. If you do and you have 4A, put it in 4A and see if the noise stays away.
Indeed, it has the FX4 package (left that part out...new member probs). I'll give that a shot, thank you kindly!
Reply
Old Jan 29, 2024 | 04:51 PM
  #4  
SpencerPJ's Avatar
5 Year Member
5 Year Member
Community Builder
Liked
Community Favorite
 
Joined: Feb 2020
Posts: 4,120
Likes: 2,261
Default

If after putting in 4a, if it stops, with mine it was a cheap check valve to replac
Reply
Old Jan 29, 2024 | 04:56 PM
  #5  
NorthwestFord'a Man's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2024
Posts: 8
Likes: 2
Default

Originally Posted by SpencerPJ
If after putting in 4a, if it stops, with mine it was a cheap check valve to replac
Outstanding, sir, thank you. I'll keep that in mind!
Reply
Old Nov 3, 2024 | 12:48 PM
  #6  
NorthwestFord'a Man's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2024
Posts: 8
Likes: 2
Default

Just wanted to circle back here and report that it did indeed end-up being the Integrated Wheel End (IWE).

Replaced Front-left and the noise - which had gotten more and more persistent on the highway - virtually went away. Noise will now appear only 1-2 times per highway trip, and definitely sounds like it's coming from the Front-right side. So I'll replace that one next.

It should also be noted that I first replaced the vacuum check valve which did next to nothing. The vacuum system was also smoke tested and held pressure like it was supposed to.

Thank you all, and hope this helps others having similar problems.

Last edited by NorthwestFord'a Man; Nov 3, 2024 at 07:56 PM.
Reply
Old Nov 3, 2024 | 07:12 PM
  #7  
johnday in BFE's Avatar
Village Sociopath
10 Year Member
Veteran: Navy
Community Influencer
Active Streak: 120 Days
iTrader: (1)
 
Joined: Jun 2014
Posts: 31,760
Likes: 12,575
From: Nowhereville, Barton City Michigan
Default

There is a TSB on your truck, that eliminates the Vacuum system entirely. I've got it somewhere.
TSB22-2219
Reply
Old Nov 3, 2024 | 07:52 PM
  #8  
NorthwestFord'a Man's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2024
Posts: 8
Likes: 2
Default

Very nice! I'll check it out...thanks, John!
Reply
Old Nov 3, 2024 | 07:54 PM
  #9  
johnday in BFE's Avatar
Village Sociopath
10 Year Member
Veteran: Navy
Community Influencer
Active Streak: 120 Days
iTrader: (1)
 
Joined: Jun 2014
Posts: 31,760
Likes: 12,575
From: Nowhereville, Barton City Michigan
Default

You're very welcome.
Reply




All times are GMT -4. The time now is 10:59 AM.