I apologize as I’ve asked before on the Forscan thread, however, sometimes your questions on there get overrun by other questions really quickly without ever getting an answer.

Has anyone figured out how to get one of the other displays (such as Lincoln) to work with the standard Ford splash screen upon startup? I don’t drive a Lincoln and don’t really want it to say Lincoln, but I do like the brown background better.

Thanks as always!

 

I would like to know as well

 

I have the 'GT' screen as provided by the forscan change. It has 3 value changes that are made in APIM section. My references for this are old and there may be a list that can be done somewhere I don't have. However, if I were changing it again, I might experiment with the values to see if one or two of them would make the desired change.
This is the 'GT' sequence:
7D0-01-02 0xxx xxxx xxxx
7D0-02-01 xxxx xDxx xxxx
7D0-03-01 xxxx x4xx xxxx

Changing one, two or all to different values might get you there. If it were me doing it, I would change the '4' to 3 for example and see if that did any thing. But, I'd do one value at a time regardless. Just remember what the original values were so you can return if you need to or there is an issue doing it.

 

I pulled these off the forscan spreadsheet. Hope it helps

7D0-01-02 *xxx xxxx xxxx Brand: 0=Ford, 8=Lincoln, C=Configurable Splash Screen

7D0-02-01 xxxx x9xx xxxx GT350 boot screen animation ** Sync 3 only **
7D0-02-01 xxxx x8xx xxxx Vignale boot screen animation ** Sync 3 only **
7D0-02-01 xxxx x7xx xxxx GT350 boot screen animation ** Sync 3 only **
7D0-02-01 xxxx x6xx xxxx Mustang boot screen animation ** Sync 3 only **
7D0-02-01 xxxx x5xx xxxx Raptor Ford Performance boot screen animation ** Sync 3 v2.2 **
7D0-02-01 xxxx x4xx xxxx Licoln Presidential boot screen animation ** Sync 3 only **
7D0-02-01 xxxx x3xx xxxx Lincoln Black Label
7D0-02-01 xxxx xBxx xxxx ST Ford Performance boot screen animation ** Sync 3 v2.2 **
7D0-02-01 xxxx xCxx xxxx RS Ford Performance boot screen animation ** Sync 3 v2.2 **
7D0-02-01 xxxx xDxx xxxx GT Ford Performance boot screen animation ** Sync 3 v2.2 **
7D0-02-01 xxxx xExx xxxx Continental

7D0-03-01 xxxx x*xx xxxx Visual Design Variants: 0=Ford Classic, 1=Ford Timeless, 2=Lincoln Timeless, 3=Lincoln Next, 4=Ford New Blue GT (must also set 7D0-02-01 xxxx xDxx xxxx)
7D0-03-01 xxxx x2xx xxxx Lincoln brown theme (Sync 3) ** must also set 7D0-01-02 8xxx xxxx xxxx

 

These two are the only way to get the brown background, however, the first one is for the GT Performance, and will "brick" it if on the 19145+ code, and can't be used. I have mine using the second one, which uses the Continental splash screen instead.

You might try using the test screen setup. I found that you can enable the test access pad which will allow you to change the background, but it isn't sticky, has to be done every time it boots.

 

Does anyone know how to stop the splash screen from coming on every time the driver's door or passenger's door is opened when the truck is off and no key is in the ignition?

 

hey man, thanks for the great work, but do these values also work on sync 4? i want to change my f150 2022's splash screen from the original to the ford perfomance




thanks in advance, KFM