When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I attempted to remove the quick connect fitting that attaches one of the vacuum hoses to the intake tube. I broke the black release tab. I’ve attached a picture showing the fitting that I’m referring to. Is there any way to get that black tab?
I'm thinking you're going to have to replace that tube assembly, I do not believe the lock tabs on each end are serviceable. There is probably some way to rig it, if you're so inclined, so it stays on, but me... I'd replace the tube assembly.
I'm thinking you're going to have to replace that tube assembly, I do not believe the lock tabs on each end are serviceable. There is probably some way to rig it, if you're so inclined, so it stays on, but me... I'd replace the tube assembly.
I have it taped up currently to hold it on. But that’s going to eat away at me if it’s not fixed appropriately. I’m ocd about that lol. I believe the whole assembly is $135 🤮
I'm thinking you're going to have to replace that tube assembly, I do not believe the lock tabs on each end are serviceable. There is probably some way to rig it, if you're so inclined, so it stays on, but me... I'd replace the tube assembly.
Help with vacuum hose fitting
