Halogen to OEM LED Headlights the Forscan Way
#131
It's my first day
If you haven't already, please be sure to rate this thread.
The following 2 users liked this post by shadowblackXLT:
Brettguercio (11-18-2017),
Roscoe968 (06-04-2020)
#134
It's my first day
If you are in Canada you can order up Molex parts from DigiKey.ca for this mod for relatively good rates. I got what I needed plus some extras (just incase) for under $30 CAD shipped.
#135
It's my first day
I'm also building my own harness to retain all factory plugs, this way if I ever need to revert back to stock halogens I easily can just plug, program and swap. As far as I can tell, the part number for the brown 3157 park lamp socket is: 2U5Z13411SA which should probably be included in the first post.
2U5Z-13411-SA
Not needed (but related), is the pigtail 3U2Z 14S411-FHAB
2U5Z-13411-SA
Not needed (but related), is the pigtail 3U2Z 14S411-FHAB
Last edited by Airborne_Ape; 11-18-2017 at 09:58 PM.
#136
I'm also building my own harness to retain all factory plugs, this way if I ever need to revert back to stock halogens I easily can just plug, program and swap. As far as I can tell, the part number for the brown 3157 park lamp socket is: 2U5Z13411SA which should probably be included in the first post.
2U5Z-13411-SA
Not needed (but related), is the pigtail 3U2Z 14S411-FHAB
2U5Z-13411-SA
Not needed (but related), is the pigtail 3U2Z 14S411-FHAB
#137
A word of advice to anyone doing this mod - it’s much easier if you leave yourself some extra wire, and instead fish your wires to the driver side footwell. There is a grommet in the upper left driver side footwell that is much easier to access from both inside the truck and under the hood. You’ll just have to run to the driver side headlight first, and then continue on with your other 2 wires to the passenger side headlight. I ran my wires across the front of the truck and zip-tied to an existing harness that ran behind the front bumper for that.
#138
Junior Member
Thanks so much for this post. I ordered two set ups worth of material for the "plug and play route". Does the alert for the seat module pop up everytime you start your truck? Thanks again guys.
#140
ShadowblackXLT I was just scoping this out and was having a difficult time trying to find out how to get to the grommet on the passenger side interior. Going to check the drivers side like you did.