Ford F150 Forum - Community of Ford Truck Fans

Ford F150 Forum - Community of Ford Truck Fans (https://www.f150forum.com/)
-   2015 - 2020 Ford F150 (https://www.f150forum.com/f118/)
-   -   Full Race Downpipe Installed (https://www.f150forum.com/f118/full-race-downpipe-installed-367958/)

khsonic03 12-30-2016 07:51 PM

Full Race Downpipe Installed
 
Just wanted to give everyone some feedback on my new mod. I installed a Full Race catted downpipe with ceramic coating. I'm extremely impressed with the quality and construction; the welds are incredible.

I did the install in my garage with the truck on ramps. It was challenging, but mainly because of the lack of space to maneuver and the tight fitment of the pipes. The hardest part was fitting/adjusting the pipes. The ceramic coating makes the pipes fit tighter, so I ended up putting some nickel anti-seize on where they fit together which helped significantly.

All in all, I'm extremely pleased. The exhaust doesn't sound much different than stock, but it has a ton more turbo whistle, which is exactly what I was looking for. As a side note, the rest of the exhaust is stock. The power is amazing. I have had an Unleashed Tuning 93 performance tune for a few months now and it has been great. I had Torrie update my tune for the downpipe and I feel significantly more power.

Below are some pics and a video (my fiance was revving the engine, so the revs are pretty whimpy lol).


https://cimg6.ibsrv.net/gimg/www.f15...e9daae0463.jpg
https://cimg6.ibsrv.net/gimg/www.f15...ae68283cc0.jpg
https://cimg2.ibsrv.net/gimg/www.f15...357cb88075.jpg

https://cimg8.ibsrv.net/gimg/www.f15...7c97707c7c.jpg

https://cimg0.ibsrv.net/gimg/www.f15...890f1fffb7.jpg

and one of the beast
https://cimg6.ibsrv.net/gimg/www.f15...62325cb9ba.jpg

smd3 12-30-2016 08:46 PM

Did you jack the truck up by the transmission pan?

N/M...I see the ramps now.

khsonic03 12-30-2016 08:52 PM


Originally Posted by smd3 (Post 5107391)
Did you jack the truck up by the transmission pan?

N/M...I see the ramps now.

The jack is just supporting the transmission pan because you have to remove the transmission support brace to remove/install the downpipe.

white_dc 12-31-2016 12:10 AM

Do you have the 3.5 or 2.7?

uood8 12-31-2016 02:31 AM

That sounds awesome

XLTsac 12-31-2016 03:09 AM


Originally Posted by white_dc (Post 5107653)
Do you have the 3.5 or 2.7?


sounds like a 2.7 to me

JMF150 5.0 12-31-2016 07:47 AM

Call me crazy but I do like the sound of the 4 cylinder turbo cars like the WRX\STI, EVO and Mazda 3 Speed. Im having a harder time liking the sounds of the V6 engines in our F150s, I would rather hear the turbo spool than the exhaust.

Either way, I like it and that's a very clean setup the OP installed but I would add a good quiet muffler and listen to the turbo all day.

khsonic03 12-31-2016 07:58 AM


Originally Posted by white_dc (Post 5107653)
Do you have the 3.5 or 2.7?

3.5

khsonic03 12-31-2016 08:15 AM


Originally Posted by JMF150 5.0 (Post 5107813)
Call me crazy but I do like the sound of the 4 cylinder turbo cars like the WRX\STI, EVO and Mazda 3 Speed. Im having a harder time liking the sounds of the V6 engines in our F150s, I would rather hear the turbo spool than the exhaust.

Either way, I like it and that's a very clean setup the OP installed but I would add a good quiet muffler and listen to the turbo all day.

I agree with having a hard time liking the sound of our v6 turbo engines. I did this mod primarily for power and because I wanted more turbo sound. My goal was to change the exhaust sound as minimally as possible, which I think it accomplished. To be honest, I'm afraid to add any aftermarket cat back systems because I'm not a fan of the sound they all produce.

Jf56 12-31-2016 08:16 AM

Good thing you went with catted pipes because unleashed or torrie wont revise your tunes if you get off-foad pipes that means you will have a check engine light on your dash


All times are GMT -4. The time now is 01:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands