thetasigma1186

Thanks to everyone for the help in working though Forscan! It has been great!

However, I disabled the engine noise on my Raptor and now when I hang up the phone or disconnect Bluetooth, I hear a speaker 'pop'. Anyone else notice that? I heard the same thing when I applied the change to disable the engine noise. Scared me at first! Then I noticed the pop a few days later when I took a call.

Thanks again for the help. If I need to re-enable the engine noise, what is the default code?

Great white

iTrader: (1)

I heard the pop as well when I applied the change. Not unusual to get the amp thump when the source is turned off before the amp, which is what you are doing with the ACM.

Haven't tried a phone call yet though. I'll do the Bluetooth thing today and see if it thumps...

redsraptor

So iOS (Apple) is basically worthless for using FORscan correct?

bhamilton

yep. read only, no write.

Jeme

Great White - what is secure idle and Lincoln mirror fold? Also did you back up all the modules or just the ones you modified? Finally (i feel stupid asking this question) Do you do these with the engine running? If not how to you put in start with the push button without starting. I am not in my car. Thanks

bhamilton

Jeme, if you look in post 1 of this thread, there is a link to a tutorial doc which should answer a lot of questions (including the engine running one).

fordtrk

Ya the ignition on engine off. Just push your start button without putting your foot on the brake.

fordtrk

Make sure you back up all your modules 1st so you have a real good original copy. Livnitup has a video on how to do it. Then you can save the modules you mod and save a before and after mod file.

Jeme

Thanks. but do you have to back up all modules or just the ones you are changing? I would assume just the ones you are changing?

TexasFording

iTrader: (14)

Livin or Dan:

can you guys help me decode these lines?

7D0-01-01 2328 6402 800A
7D0-01-02 0208 1300 0A01

Thanks