FORScan - software to enable/disable features in your truck
Senior Member
Having small issue getting my OBDlink MX to pair to my Windows computer, I have tried 2 of them---it Will PAIR to my phone and my Old Macbook pro!! Granted one Windows computer is older, and then I tried my work Windows and still would not see the MX. Is there a driver or something I may need to install for it to work? Weird for sure!
***I had another older windows computer that worked fine until I gave it to a friend****
***I had another older windows computer that worked fine until I gave it to a friend****
TOTM October 2023
iTrader: (2)
Having small issue getting my OBDlink MX to pair to my Windows computer, I have tried 2 of them---it Will PAIR to my phone and my Old Macbook pro!! Granted one Windows computer is older, and then I tried my work Windows and still would not see the MX. Is there a driver or something I may need to install for it to work? Weird for sure!
***I had another older windows computer that worked fine until I gave it to a friend****
***I had another older windows computer that worked fine until I gave it to a friend****
I have MY12 Explorer and have upgraded from SYNC 2 to SYNC 3. Everything is OK except minor ussues. SYNc display doesnt show climate controls adjustments as temperature and fan speed. Moreover, Right IPC display in Navi mode doesnt shows street vehicle is on anymore (SYNC 2 worked just fine) and shows compass only.
Does anybody know if it possible to fix using ForScan?
Does anybody know if it possible to fix using ForScan?
Last edited by RedDen18; 10-22-2022 at 02:23 PM.
Lost in Time
Join Date: May 2011
Location: North Dallas Forty, OC California
Posts: 521
Received 213 Likes
on
98 Posts
2020 Raptor Tire size throws CEL
Changed tire size to match LivinItUps spreadsheet to the KO2 size 315-70-17 which should be xxxx A068 xxxx. Forscan popped up a message noting there is a check sum error but if from a trusted source it may be ok....at least I think that's the gist of what it said. Truck has the wrench CEL now. I need to go thru and run the DTC to see exactly, but won't have time until this evening. Anyone have any idea?
My original tire size was 0A5D. Truck was purchased used with Yokohama Geolanders 315-70-17...this is the only change I've made to date on the Raptor.
My original tire size was 0A5D. Truck was purchased used with Yokohama Geolanders 315-70-17...this is the only change I've made to date on the Raptor.
Last edited by msu50000; 10-23-2022 at 12:14 PM.
TPMS Magician
iTrader: (2)
Changed tire size to match LivinItUps spreadsheet to the KO2 size 315-70-17 which should be xxxx A068 xxxx. Forscan popped up a message noting there is a check sum error but if from a trusted source it may be ok....at least I think that's the gist of what it said. Truck has the wrench CEL now. I need to go thru and run the DTC to see exactly, but won't have time until this evening. Anyone have any idea?
My original tire size was 0A5D. Truck was purchased used with Yokohama Geolanders 315-70-17...this is the only change I've made to date on the Raptor.
My original tire size was 0A5D. Truck was purchased used with Yokohama Geolanders 315-70-17...this is the only change I've made to date on the Raptor.
on my 2019 I get the wrench, you have to do the PCM and TCM relearn
The following users liked this post:
WVMoose (10-23-2022)
It's my first day
Hi everyone, I been having two issues with the 8’ screen uprade one is the calling I can’t hear a thing when I make a call over Bluetooth or when someone calls me. Second my screen is blurry it works but it’s static or blurry I don’t know if it has to do with any of the connections or interference. I am new to forscan I downloaded the program and have it. Would some please help if with the right codes or procedures I would really appreciate it thank you fam.
You are going to have to go through the APIM options and configure your replacement unit to match the options on your truck. Nobody here will be able to blindly suggest configuration data unless if they have a lot of free time to donate. There are some people that might still remote in and charge a fee for it though.
Use the compare utility Livnitup linked in his tutorial, reference the spread sheet and compare your vin as built data with that from a nearly identical optioned truck. Copy the applicable settings and once you have a basic framework, then you can ask people here for help to dial in remaining settings you might be having issues with.
If nobody else replied to your post it is because you are asking way to much with way too little. Programming a retrofit APIM is tedious process.
Depending what the replacement ECU came from it is possible you have both physical wiring issues in addition to programming errors.
By the sounds of it I’m guessing you didn’t program your ACM (audio amp) yet to communicate to the replacement APIM which is causing your most noticeable issues.
Last edited by Airborne_Ape; 11-03-2022 at 10:21 PM.
The following users liked this post:
digitaltrucker (10-27-2022)
Senior Member
The following users liked this post:
DCM (11-02-2022)