FORScan - software to enable/disable features in your truck
Senior Member
So the massaging seats on my platinum, when I first purchased it, you could press the middle button on the side seat controls, massaging would start and if I recall correctly the sync display would pop up to the seat app so you could make adjustments, but massaging was on from the moment you pressed the button on the seat.
Now when I press the button on the seat, massaging doesn’t start, but instead the sync seat app pops up and I must select massage before the massaging function starts. I assume I changed something in ForScan to cause this?
Now when I press the button on the seat, massaging doesn’t start, but instead the sync seat app pops up and I must select massage before the massaging function starts. I assume I changed something in ForScan to cause this?
Senior Member
iTrader: (1)
I just tested this on my 2020. Try this: hit the button on the seat, the seat app will come up on the screen, set your preferences and it will activate. Then push the seat button again, it will turn off, seat app re-appears. When you push the seat button again, the seat massage will start with your last used preferences.
I have not verified this 100%, but I am sure the passengers seat is the same way.
Captain of Industry
Senior Member
Join Date: Mar 2017
Location: South St. Louis county, Mo.
Posts: 1,465
Received 423 Likes
on
303 Posts
SNIP---->
However, the following modifications didn't work on my 2020 F-150:
-Reverse Tilt Mirror (I followed all the steps on the spreadsheet, plus I watched 3 "How-to" videos for the calibration, and nothing).
I don't know if Ford re-mapped the modules for the 2020 models, and maybe that's why it's not working correctly.
JC
However, the following modifications didn't work on my 2020 F-150:
-Reverse Tilt Mirror (I followed all the steps on the spreadsheet, plus I watched 3 "How-to" videos for the calibration, and nothing).
I don't know if Ford re-mapped the modules for the 2020 models, and maybe that's why it's not working correctly.
JC
I followed the link for the calibration procedure, but couldn't get them to work. My 2005 HD2500 had the tilt in reverse feature, and it was set the same way.
Anyone got this to work on a 2020?
TIA
TOTM November 2019
iTrader: (2)
Well since it didn't get answered, I assume there is no way to make the dome/cargo light time-out longer.
Senior Member
iTrader: (1)
Maybe these?
726-32-02 xx** xxxx xxxx Courtesy Lamp ramp down duration (seconds converted to hex)
726-32-02 xxxx xx** xxxx Courtesy Lamp ramp up duration (seconds converted to hex)
726-32-02 xx** xxxx xxxx Courtesy Lamp ramp down duration (seconds converted to hex)
726-32-02 xxxx xx** xxxx Courtesy Lamp ramp up duration (seconds converted to hex)
TOTM November 2019
iTrader: (2)
Thanks Wile, what module are those numbers from? I am not familiar with converting to hex, but I am willing to give it a shot if I know what values to place. Thanks!
Senior Member